4OM-1733-005w_F8.pdf - 第113页

4OM-1733 1-4-40 4.8.4 Y -axis Linear Guide Cleaning and Oiling Cycle : Every 3 Months (Required Time : 5 minutes) Grease : DAPHNE EPONEX GREASE No.1 Y-Axis Linear Guides Slider Fig. 4A4-51 Procedure (1) Wipe old grease o…

4OM-1733

1-4-39

4.8.3 Y-axis Linear Guide Check

Cycle : Every Day (Required Time : 1 minute)

Y-Axis Linear Guides

Fig. 4A4-50

Procedure

Check it visually that no alien substance has been dropped. If any alien substance

has been dropped, remove it.

1211-002

4.8 X/Y Beam Section

4OM-1733

1-4-40

4.8.4 Y-axis Linear Guide Cleaning and Oiling

Cycle : Every 3 Months (Required Time : 5 minutes)

Grease : DAPHNE EPONEX GREASE No.1

Y-Axis Linear Guides

Slider

Fig. 4A4-51

Procedure

(1) Wipe old grease out using a rag.

(2) Apply new grease from the grease nipple using the hand grease gun.

Note

Grease should be applied every 3 months after the initial month.

Notice

Take ample care not to leave any waste threads after cleaning.

1211-002

4.8 X/Y Beam Section

4OM-1733

1-4-41

4.8.5 Y-axis Cable Side Cleaning and Oiling

Cycle : Every 6 Months (Required Time : 3 minutes)

Grease : BARRIERTA IEL/V

Y-Axis Cable Side

Fig. 4A4-52

Procedure

(1) Wipe off old grease with an oiled rag.

(2) Apply new grease by hand or with a brush.

Notice

Take ample care not to leave any waste threads after cleaning.

1211-002

4.8 X/Y Beam Section