4OM-1733-005w_F8.pdf - 第147页
4OM-1733 1-6-2 1208-001 (3) After xing the diffusion plates using bolts, remove the jigs No. 1 and No. 2. Fig. 4A6-3 6. Use Procedure of Diffusion Plate Setup Jig
4OM-1733
1-6-1
1208-001
6. Use Procedure of Diffusion Plate Setup Jig
6. Use Procedure of Diffusion Plate Setup Jig
Procedure
(1) Set the both inner and outer diffusion plates temporarily.
Outer Diffusion Plate
Inner Diffusion Plate
Fig. 4A6-1
(2) Attach the Jigs No. 1 and No. 2 onto the three locations as shown in the
gure.
Take care not to damage the linear measure sensor.
Jig 1 Jig 2
Fig. 4A6-2
4OM-1733
1-6-2
1208-001
(3) After xing the diffusion plates using bolts, remove the jigs No. 1 and No. 2.
Fig. 4A6-3
6. Use Procedure of Diffusion Plate Setup Jig
4OM-1733
1-7-1
1211-002
7. Consumables and Servicing Parts
7. Consumables and Servicing Parts
7.1 List of Consumables
This component list is for the components that would be worn within one year.
When any of these components are to be purchased, contact Marketing Dept. of
YAMAHA MOTOR CO., LTD or our sales agent.
Table 4A7-1
Product Name Part No. Part Name Q'ty
Recommended
Replacement
Cycle
Recommended
number per year
Note (a)
Remarks
Nozzle (HV82C)
Nozzle (HG82C)
KYA-M7782-A0
HV82C---
ASSY_NOZZLE(HV82C) 30 One Year 30
Nozzle (HV13C)
Nozzle (HG13C)
KYA-M7713-A0
HV13C---
ASSY_NOZZLE(HV13C) 30 One Year 30
Nozzle (HV14C)
Nozzle (HG14C)
KYA-M7714-A0
HV14C---
ASSY_NOZZLE(HV14C) 30 One Year 30
Nozzle (HG33C) KYA-M7703-A0
HG33C---
ASSY_NOZZLE(HG33C) 30 One Year 30
Nozzle (HG52C) KYA-M7705-00
HG52C---
ASSY_NOZZLE(HG52C) 30 One Year 30
Nozzle (HG24C) KYA-M7702-A0
HG24C---
ASSY_NOZZLE(HG24C) 30 One Year 30
Vacuum Filter
KYB-M704D-00
225B0572
AIR_CLEAN_EQPT 120 Three Months 240
Nozzle Filter KYA-M7702-10
225A0045
AIR CLEAN EQPT 60 One Week 1440
(720)
Note (e)
Note
(a) The recommended number of pieces is the value for reference only.
(b) Refer to "3. Maintenance Spots" for component replacement procedures.
(c) The recommended replacement cycle does not show the product warranty
period. The recommended replacement cycle varies depending on the
operation condition or operation environment of the product.
(d) In the case of consumables, for the malfunction due to an error in the
manufacturing process, we will replace it by a new one for free of charge.
(e) The recommended replacement cycle for the nozzle lter varies depending
on the nozzle type, pattern program data or operation environment.
(f) The type of nozzle can be identied with the prex of the item name
HV--- : Rigid Nozzle
HG--- : Soft Mounting Nozzle