4OM-1733-005w_F8.pdf - 第50页

Safety Precautions Safe-40 1OM-1733 1204-001 6. Precautionary Items for Correct Operations

100%1 / 153
Safety Precautions
Safe-39
1OM-1733
1204-001
6. Precautionary Items for Correct Operations
Power Failure
Instantaneous voltage drop due to power failure or lightning will cause the built-in computer
to break down and the basic and application programs to corrupt.
It is recommended that a DC uninterruptive power supply be used as a countermeasure
against instantaneous voltage drop.
Built-In Computer
A computer is built in the machine and used to control each internal mechanism of the
machine, save various data, and realize a user interface.
When the power switch of the machine is turned off while the computer is working (computer
being accessed), the computer may break down, causing the stored data and application
programs to corrupt.
Refer to "4.2 Power OFF" in "Chapter 2 (Vol. 1: Guide)" for how to turn off the power
switch of the machine.
Note on Startup Operation (Running-In Operation)
After the machine has been stopped for a long period of time, perform a running-in
operation for approximately 30 minutes to smoothly start up the machine.
Reference
Refer to "6. Running-In Operation" in "Chapter 3 (Vol. 1: Guide)" for the detailed
information on the running-in operation.
Safety Precautions
Safe-40
1OM-1733
1204-001
6. Precautionary Items for Correct Operations
Contents
Cont-2
Page
4OM-1733
1211-003
Chapter 1 Maintenance
1. Outline of Maintenance ...................................................................1- 1- 1
1.1 Notes on Maintenance ............................................................1- 1- 1
1.2 Preparation for Maintenance ..................................................1- 1- 2
1.2.1 Preparation for Cleaning ................................................1- 1- 2
1.2.2 Preparation for Lubrication ............................................1- 1- 5
1.3 Items for Periodic Maintenance ..............................................1- 1- 8
2. Maintenance Check List .................................................................1- 2- 1
2.1 Daily Maintenance ..................................................................1- 2- 1
2.2 Weekly Maintenance...............................................................1- 2- 2
2.3 Monthly Maintenance .............................................................. 1- 2- 3
2.4 Quarterly Maintenance ...........................................................1- 2- 4
2.5 Half-Yearly Maintenance .........................................................1- 2- 5
2.6 Yearly Maintenance ................................................................1- 2- 5
3. Maintenance Spots .........................................................................1- 3- 1
3.1 Whole View .............................................................................1- 3- 1
4. Inspection, Cleaning, and Lubrication Spots ..................................1- 4- 1
4.1 Air Source ...............................................................................1- 4- 1
4.1.1 Air Blow Pressure Check ...............................................1- 4- 2
4.1.2 Main Air Pressure Check ...............................................1- 4- 3
4.1.3 Drain Check ...................................................................1- 4- 4
4.1.4 Filter Cleaning ...............................................................1- 4- 5
4.2 Vacuum System ......................................................................1- 4- 7
4.2.1 Vacuum Pressure Check ...............................................1- 4- 8
4.2.2 Filter Cleaning ...............................................................1- 4- 9
4.3 Component Recognition Camera Section ..............................1- 4- 10
4.3.1 Component Recognition Camera Cleaning ...................1- 4- 11
4.3.2 Rejected Component Box Cleaning ..............................1- 4- 12
4.3.3 Fiducial Mark (Four Locations) Cleaning .......................1- 4- 13
4.4 Feeder Base Driving Section ..................................................1- 4- 14
4.4.1 Warm Gear (Two Locations) Oiling................................1- 4- 15
4.5 Feeder Cart Section ................................................................ 1- 4- 16
4.5.1 Feeder Base Upper Surface Groove Cleaning ..............1- 4- 17
4.5.2 Feeder Base Upper Surface Cleaning ...........................1- 4- 18
4.5.3 Reel Box Cleaning .........................................................1- 4- 19
4.5.4 Scrap Box Cleaning .......................................................1- 4- 19