4OM-1733-005w_F8.pdf - 第91页

4OM-1733 1-4-18 4.5.2 Feeder Base Upper Surface Cleaning Cycle : Every Day (Required Time : 2 minutes) Upper Surface of Feeder Base Fig. 4A4-23 Procedure Remove foreign substances and unrequired components with a vacuum …

4OM-1733

1-4-17

4.5.1 Feeder Base Upper Surface Groove Cleaning

Cycle : Every Week (Required Time : 2 minutes)

Groove on Feeder Base

Fig. 4A4-22

Procedure

Suck dirt and dust with a vacuum cleaner.

1208-001

4.5 Feeder Cart Section

4OM-1733

1-4-18

4.5.2 Feeder Base Upper Surface Cleaning

Cycle : Every Day (Required Time : 2 minutes)

Upper Surface of Feeder Base

Fig. 4A4-23

Procedure

Remove foreign substances and unrequired components with a vacuum cleaner

and wipe off dirt and dust with a rag.

1208-001

4.5 Feeder Cart Section

4OM-1733

1-4-19

4.5.3 Reel Box Cleaning

Cycle : Every Day (Required Time : 5 minutes)

Reel Box

Fig. 4A4-24

Procedure

Remove debris and dust from the bottom of the reel box using a vacuum cleaner.

4.5.4 Scrap Box Cleaning

Cycle : Every Day (Required Time : 1 minute)

Scrap Box

Fig. 4A4-25

Procedure

Check the scrap box and when the scrap box is full of empty tapes, pull out the

scrap box and remove such empty tapes.

1211-002

4.5 Feeder Cart Section