4OM-1733-005w_F8.pdf - 第102页

4OM-1733 1-4-29 4.7.4 Center Spline Oiling Cycle : Every 3 Months (Required Time : 4 minutes) Grease : DAPHNE EPONEX GREASE No.1 Center Spline Fig. 4A4-37 Procedure Apply grease to the groove of the center spline with a …

4OM-1733

1-4-28

4.7.3 Diffusion Plate Cleaning

Cycle : Every Month (Required Time : 5 minutes)

Diffusion Plate

Fig. 4A4-36

Procedure

(1) Store all nozzles in the nozzle stocker (housing) through window navigations.

Reference

Refer to "5. Nozzle Change Window" in "Chapter 6 (Vol. 2)" for the

procedure of nozzle storage.

(2) Wipe the diffusion plate with a dry lens cleaning cloth.

Notice

Sebum or oil should not adhere to the surface of the diffusion plate.

1208-001

4.7 Head Section

4OM-1733

1-4-29

4.7.4 Center Spline Oiling

Cycle : Every 3 Months (Required Time : 4 minutes)

Grease : DAPHNE EPONEX GREASE No.1

Center Spline

Fig. 4A4-37

Procedure

Apply grease to the groove of the center spline with a syringe.

Note

Use No. 19 (brown) nozzle.

No.19

Fig. 4A4-38

1211-002

4.7 Head Section

4OM-1733

1-4-30

4.7.5 Cam Follower Cleaning and Oiling

Cycle : Every 3 Months (Required Time : 5 minutes)

Grease : DAPHNE EPONEX GREASE No.1

Cam Followers

Fig. 4A4-39

Procedure

(1) If foreign substances adhere to the cam followers, remove them with a pair

of tweezers.

(2) Apply grease (0.01 cc) to the upper side of the cam face with a syringe.

Note

(a) "0.01 cc" is almost equivalent to the size of "1005 Chip".

(b) Use No. 19 (brown) nozzle.

No.19

Fig. 4A4-40

1211-002

4.7 Head Section