4OM-1733-005w_F8.pdf - 第87页

4OM-1733 1-4-14 4.4 Feeder Base Driving Section Worm Gear (2 locations) Every 3 Months Lubrications Required T ime : 2 minutes Fig. 4A4-17 121 1-002 4.4 Feeder Base Driving Section

4OM-1733

1-4-13

4.3.3 Fiducial Mark (Four Locations) Cleaning

Notice

Use a suction force (of a vacuum cleaner) for the cleaning.

Do not blow air to any cleaning section with an air gun.

When the air is blown, dirt or dust inside the machine will disperse,

causing a malfunction in the recognition or machine operation.

Cycle : Every Week (Required Time : 2 minutes)

Fiducial Marks

Teaching Plates

(2 locations)

QFP Glass Plate Jigs

(2 pcs.)

Fig. 4A4-16

Procedure

Wipe the upper surfaces of the ducial marks with a dry lens cleaning cloth.

Notice

 (a) Sebum(ngerprint)oroilshouldnotadheretotheducialmarks.

If sebum or oil adheres, wipe it off with a lens cleaning cloth which

contains a small amount of alcohol.

(b) Becausetheducialmarkisonacoatinglm,handleitcarefullynot

to damage.

•

Teaching Plates (2 locations)

Cycle : Every Month (Required : 1 minute)

Procedure

Remove foreign substances and unrequired components and wipe off dirt

and dust with a rag.

•

QFP Glass Plate Jigs JG-0335, KYA-M3804-000 (2 pcs.)

Cycle : Every Month (Required : 1 minute)

Procedure

Wipe the jigs with a dry lens cleaning cloth.

Notice

 Sebum(ngerprint)oroilshouldnotadheretotheQFPglass

plate jigs. If sebum or oil adheres, wipe it off with a lens cleaning

cloth which contains a small amount of alcohol.

1403-005

4.3 Component Recognition Camera Section

4OM-1733

1-4-14

4.4 Feeder Base Driving Section

Worm Gear (2 locations)

Every 3 Months Lubrications

Required Time : 2 minutes

Fig. 4A4-17

1211-002

4.4 Feeder Base Driving Section

4OM-1733

1-4-15

4.4.1 Warm Gear (Two Locations) Oiling

Cycle : Every 3 Months (Required Time : 2 minutes)

Grease : MOLYNOC GREASE AP1

Worm Gear

Fig. 4A4-18

Procedure

Apply a small amount of new grease to the worm gears with a syringe.

Note

Use No. 19 (brown) nozzle.

No.19

Fig. 4A4-19

1211-002

4.4 Feeder Base Driving Section