ServiceInstruction_Vision XP.pdf - 第22页
Page 18 Vision XP+ V AC 2 M aintenance 2.5 Pro cess chamber Operating Instructions V ersion 1.5 2.5.3 Cleaning the nozzle holder (VXP+) Fig. 2-9 Nozzle holder Fig. 2-1 0 Extractin g the no zzle holde r Fig. 2-1 1 Extract…
Vision XP+ VAC Page 17
2 Maintenance
2.5 Process chamber
Operating Instructions
Version 1.5
Fig. 2-7 Oven station CAD 1
Fig. 2-8 Oven station CAD2
6. The screws shown must also be
checked and retightened as nec-
essary.
7. Checking and, if necessary,
retightening may also be required
here.
Page 18 Vision XP+ VAC
2 Maintenance
2.5 Process chamber
Operating Instructions
Version 1.5
2.5.3 Cleaning the nozzle holder (VXP+)
Fig. 2-9 Nozzle holder
Fig. 2-10 Extracting the nozzle holder
Fig. 2-11 Extracting the nozzle holder
Fig. 2-12 Extracting the nozzle holder
Consumable:
• Oven cleaner
• Cleaning rags
• 1 mm drill
• 22-er flat spanner
Procedure:
1. The nozzle holder connection is
at the back of the machine. Re-
move the complete nozzle hold-
er pipe here for easier cleaning.
2. First remove the Festo hose
whilst cold.
3. Use a 22 mm flat spanner to
loosen the nuts. Now pull out
the nozzle holder pipe.
Vision XP+ VAC Page 19
2 Maintenance
2.5 Process chamber
Operating Instructions
Version 1.5
Fig. 2-13 Inserting the nozzle holder
4. Use an oven cleaner to clean
the complete nozzle holder
pipe. Ream the holes with a 1
mm drill.
Then reassemble everything in
reverse order.
Ensure that the nozzle holder is
properly pushed into its guide.