ServiceInstruction_Vision XP.pdf - 第6页
Page IV V ISION XP+ V AC Contents Operating Instructions V ersion 1.5 Index ...................... .............. ................. .............. ................. ... 13 7
VISION XP+ VAC PageIII
Contents
Operating Instructions
Version 1.5
3.5.3 Siemens Type MM 420 with Profibus - Connections ............................................ 91
3.6 Fan Parameters ................................................................................................... 93
3.7 N2 Operating Parameters ................................................................................... 94
3.8 Consumption Parameter .................................................................................... 96
3.9 Filter F9 Parameter.............................................................................................. 97
3.10 Volume flow control, cooling section parameters ........................................... 98
3.11 Vacuum chamber service................................................................................. 100
3.12 Vacuum parameters.......................................................................................... 102
3.13 Settings for Individual Components ............................................................... 103
3.13.1 Adjustment instruction for the vacuum pump positioner ..................................... 103
3.14 Backup Tool....................................................................................................... 105
3.15 Configuration Activ Energy Meters ................................................................. 109
3.16 Adjustment, Inspection .................................................................................... 111
3.16.1 Inspecting Conveyor Width for Parallelism ......................................................... 111
3.16.2 Adjusting the Conveyor Side Panels................................................................... 112
3.16.3 Checking Center Support Position ...................................................................... 113
3.16.4 Adjusting the Center Support .............................................................................. 114
3.17 Teaching of Ultrasonic Sensor Inlet and Outlet ............................................. 115
3.18 Exhaust Air Monitoring..................................................................................... 117
3.19 Monitoring the Water Flow Rate ...................................................................... 119
3.20 Regulating the Coolant Water Circuit ............................................................. 120
3.21 Checking and Adjusting Nitrogen Pressure................................................... 121
3.22 Default Values ................................................................................................... 123
3.22.1 Adjustment Default Values.................................................................................. 123
3.22.2 Alarm Configuration Default Values .................................................................... 124
3.22.3 Frequency Converter Parameter Default Values VXP+ ...................................... 126
3.22.4 Fans Monitoring Default Values .......................................................................... 127
3.22.5 Interface Default Values...................................................................................... 128
3.22.6 Conveyor Default Values .................................................................................... 128
3.22.7 Conveyor Drive Parameter Default Values ......................................................... 129
3.22.8 Chain Lubricator Default Values ......................................................................... 129
3.22.9 Default Values Nitrogen control .......................................................................... 130
3.22.10 Default Values Consumption Parameters ........................................................... 131
3.22.11 Default Values Filter F9 Parameter..................................................................... 131
List of Figures ....................................................................... 133
List of Tables......................................................................... 135
Vision XP+ VAC Page 3
1 Introduction
1.1 Layout of the Service Instructions
Operating Instructions
Version 1.5
1 Introduction
1.1 Layout of the Service Instructions
These service instructions include the following chapters:
Introduction
The introduction provides you with an overview of the layout and the revision
levels of the service instructions. Beyond this, safety precautions for the
performance of service work on the system are included as well.
Maintenance
The maintenance schedule is included in this chapter. All tasks required for
keeping the system in safe operating condition are described.
Setup Instructions
This chapter concerns itself with all important system setup procedures
which become necessary when new components are installed. The setup
instructions also apply in the event that probe, sensor or transducer
deviations are detected during inspection.
1.2 Overview of Revision Levels
Tab. 1-1 Revision Levels for Service Instructions
Note!
The contents of these service instructions are not part of any previous or
existing agreement, commitment or legal relationship, nor do they have any
effect on such. Any and all responsibility borne by Rehm Thermal Systems
GmbH results from the respective sales contract, which also includes com-
plete, generally valid guarantee conditions. These contractual guarantee
conditions are neither supplemented nor restricted by the contents of these
service
instructions.
Document Version Date
First draft Service Instruction Reflow System 1.0 12/2012
Revision Service Instruction Reflow System 1.1 05/2013
Revision Service Instruction Reflow System 1.2 03/2014
Revision Service Instruction Reflow System 1.3 12/2014
Revision Service Instruction Reflow System 1.4 03/2015
Revision Service Instruction Reflow System 1.5 09/2016