ServiceInstruction_Vision XP.pdf - 第23页

Vision XP+ V AC Page 19 2 Maintenance 2.5 Process chamber Operating Instructions V ersion 1.5 Fig. 2-1 3 Inserting the nozz le holder 4. Use an ove n cleaner to clean the compl ete nozzle holder pipe. Ream t he holes wit…

100%1 / 142
Page 18 Vision XP+ VAC
2 Maintenance
2.5 Process chamber
Operating Instructions
Version 1.5
2.5.3 Cleaning the nozzle holder (VXP+)
Fig. 2-9 Nozzle holder
Fig. 2-10 Extracting the nozzle holder
Fig. 2-11 Extracting the nozzle holder
Fig. 2-12 Extracting the nozzle holder
Consumable:
• Oven cleaner
• Cleaning rags
• 1 mm drill
• 22-er flat spanner
Procedure:
1. The nozzle holder connection is
at the back of the machine. Re-
move the complete nozzle hold-
er pipe here for easier cleaning.
2. First remove the Festo hose
whilst cold.
3. Use a 22 mm flat spanner to
loosen the nuts. Now pull out
the nozzle holder pipe.
Vision XP+ VAC Page 19
2 Maintenance
2.5 Process chamber
Operating Instructions
Version 1.5
Fig. 2-13 Inserting the nozzle holder
4. Use an oven cleaner to clean
the complete nozzle holder
pipe. Ream the holes with a 1
mm drill.
Then reassemble everything in
reverse order.
Ensure that the nozzle holder is
properly pushed into its guide.
Page 20 Vision XP+ VAC
2 Maintenance
2.5 Process chamber
Operating Instructions
Version 1.5
2.5.4 Cleaning of coated nozzle fields (option)
Water-based medium or adhesive:
Solvent-based adhesives and oil-containing media:
Fig. 2-14 Cleaning of coated nozzle fields
Consumable:
• soft brush
Procedure:
1. Cleaning should be done with
warm water or soapsuds, but
the soapsuds has to be rinsed
with a lot of water subsequently.
Note!
Please use as auxiliary means for
mechanical removal a soft brush
and just a little pressure.
Fig. 2-15 Cleaning of coated nozzle fields
Consumable:
• soft brush
• acetone or Appropriate cleaning
agent
Procedure:
1. Cleaning should be done with
Acetone or Appropriate clean-
ing agent. Please use soft
brush and only just a little
pressure.
Note!
Cleaned surfaces have to be rinsed
with water subsequently to restore
the original characteristics.
Note!
Never use high-pressure cleaner as the water-repellent characteristics of
the coating will be damaged through this.