4H4CEPM.pdf - 第41页
Page 31 301 CM 5-2 Editing T ray Data 1. Click on T rayLibrary . • [T rayLibrary] window opens. 2. Choose “NewData” from “Edit” on the menu bar . 3. Enter from T rayName to SpeedData in due order . 4. Click on PatternEdi…
Page 30
5 Tray Data
5-1 Tray Data
Custom Tray Data Library
1. TrayName
2. TrayOuterSize
3. Tray Block Data
4. SpeedData
5. PatternEdit
6. TrayPosRecog
1. TrayName
Indicates the name of the tray.
2. TrayOuterSize
Indicates the length, the width and the thickness of the tray.
3. Tray Block Data
Indicates the pick-up start point (X, Y), the last pick-up point (X, Y), the number of chips and the
pick-up height.
4. SpeedData
Indicates the lifter speed and the pallet drawing-out speed.
5. PatternEdit
Indicates the chip arrangement on the tray pallet.
6. TrayPosRecog
When “Yes” is chosen, the position of the tray is recognized.
4H4C-E-PMA01-A03-02
4H4C-EPt-EdTl-004
Page 31
301
CM
5-2 Editing Tray Data
1. Click on TrayLibrary .
• [TrayLibrary] window opens.
2. Choose “NewData” from “Edit” on the
menu bar.
3. Enter from TrayName to SpeedData in
due order.
4. Click on PatternEdit .
• [TrayPartsMissingPatternEdit] window opens.
5. Set the chip arrangement by the
pattern edit.
∗ You can set a zigzag arrangement by just
choosing “Edit” > “Zigzag(1,1)PartsYes” or
“Zigzag(1,1)PartsNo” on the menu bar.
6. Click on Close .
• The main menu is displayed.
4H4C-E-PMA01-A03-03
Tray Data
4H4C-EPt-Ed-001
4H4C-EPt-EdTl-002
4H4C-EPt-EdTl-004
4H4C-EPt-EdTl-003
Page 32
6 Board Data
6-1 Board Data
1. BoardSize
2. Coordinates
3. OriginOffset
4. BadBoardMarkPos
5. Mnt End chip Max T
The descriptions are as follows.
1. BoardSize
The length of the surface parallel to board flowing direction is L (mm), that vertical to it is W (mm)
and the thickness of the board is T (mm).
2. Coordinates
Choose datum coordinates on the board from among Right Rear, Right Front, Left Front and Left
Rear.
Each direction of the coordinate axis is as follows.
All the coordinates on the board are represented on the basis of Coordinates (set in this step.) and
OriginOffset (set in the next step.)
4H4C-E-PMA01-A03-03
4H4C-EPt-EdBd-002
X
Y
X
Y
X
Y
X
Y
Front side Front side Front side Front side
Right Rear Right Front Left Front Left Rear
433C-078E
50 mm to 460 mm
50 mm to 360 mm
0.5 mm to 3.0 mm
Input Limits
L (Length)
W (Width)
T (Thickness)