4H4CEPM.pdf - 第49页

Page 39 301 CM 4H4C-E-PMA01-A03-01 8 Feeder Layout List 8-1 Feeder Layout List Register all the chips to use into the feeder layout list. 1. PartsName 2. ChipName 3. Style 4. Angle 5. Skip 6. Retry 7. AllChipInformation …

100%1 / 90
Page 38
4H4C-E-PMA01-A03-01
444C-EPt-EdBr-004
444C-EPt-EdBr-003
444C-EPt-EdBr-004
Board Recognition Data
4. Click on SelectREF .
• [SetREF] window opens.
5. Choose REF No., DesignateShape
and Color, enter Size, and click on
OK .
• [SetREF] window closes.
6. Input the data of from B point onward
by repeating the steps from 3. to 5.
7. Click on Close .
• The main menu is displayed.
Page 39
301
CM
4H4C-E-PMA01-A03-01
8 Feeder Layout List
8-1 Feeder Layout List
Register all the chips to use into the feeder layout list.
1. PartsName
2. ChipName
3. Style
4. Angle
5. Skip
6. Retry
7. AllChipInformation
The descriptions are as follows.
1. PartsName
You can register any chip name as “PartsName” for each chip type.
2. ChipName
This is the name registered in the chip library.
4H4C-EPt-EdPl-001
Page 40
4H4C-E-PMA01-A03-01
Feeder Layout List
3. Style (Packing Form)
This is the packing form of chips and is set by using numbers. The packing angle changes 45
degree at a time as the number changes. (See below.) When inputting Style, choose a number
according to the packing form of chips on the tape regardless of “(pick-up) Angle” and the condi-
tions for recognition.
NOTICE
The angle of “Style” specifies the packing form of chips and is determined
regardless of “(pick-up) Angle” and the conditions for pick-up and recognition.
Chart 1 Style (Packing form) of chips which the tape feeds (Typical example)
4H4C-613E
Angle
Chip
Non-polarized
square chip
Transistor
Tantalum
capacitor
SOP
FET
Feeding Direction
Example
Style: ± 180°
±180°0° -90°90°
∗ As for trays and tubes, perform the same procedure to register.
444C-IL622E