4H4CEPM.pdf - 第8页
Page 2 SAFETY PRECAUTIONS Be sure to observe 4H4C-E-PMA00-B03-00 DO NOT DAMAGE POWER AND OTHER CORDS OR PLUGS. Damaged cord and plug may cause electric shock, short circuit or fire. Hold the plug when plugging in or unpl…
Page 1
SAFETY PRECAUTIONS
Be sure to observe
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to failure to read an indica-
tion is classified and described as follows.
The matters should be observed are classified and described according to the symbols
shown below.
(The followings are only some examples of the symbolic indications.)
This indication refers to a situation which is considered that
there is imminent danger of death or serious injury.
This indication refers to a situation which is considered that
there is a possibility of death or serious injury.
This indication refers to a situation which is considered that
there is a possibility of only injury or physical damage.
These symbols indicate matters to which attention must be paid.
This symbol indicates an action that must not be carried out.
DANGER
WARNING
CAUTION
This symbol indicates an action that must be carried out.
4H4C-E-PMA00-B03-01
NOTICE
This part describes the precautions in using PT.
As for the personal computer, monitor, etc., observe the precautions described in each
manual.
When operating machine, see “SAFETY PRECAUTIONS” in operating and mainte-
nance manuals of the machine.
Page 2
SAFETY PRECAUTIONS
Be sure to observe
4H4C-E-PMA00-B03-00
DO NOT DAMAGE POWER AND
OTHER CORDS OR PLUGS.
Damaged cord and plug may cause electric shock,
short circuit or fire.
Hold the plug when plugging in or unplugging.
Cord and plug repairs should be attempted only
by the person competent to do the electrical
work, or contact the manufacturer.
M85E
Never damage, remake, bring
close to heating appliances, bend
forcibly, twist, pull, put heavy
objects on, and bundle up.
PERIODICALLY REMOVE DUST
FROM POWER PLUG.
Dust on the plug may result in fire caused by
defective insulation because of moisture.
Pull out the power plug and wipe off dirt with dry
cloth.
If the machine is not going to be used for a long
period, turn off the breaker connected with the
machine.
M86E
FIRMLY INSERT THE
POWER AND OTHER
PLUGS.
Imperfect plugging in may
cause fire because of electric
shock and generated heat.
Do not use the damaged
plug or loose outlet.
M87E
M88E
DO NOT INSERT OR
REMOVE POWER AND
OTHER PLUGS BY
WET HAND.
If plugged in or unplugged by
wet hand, it may result in
electric shock.
M06E
GROUND THE MA-
CHINE PROPERLY.
There is a risk of an electric
shock or leak.
Consult a professional
electrical contractor.
M90E
OBSERVE RATINGS WHEN
USING OUTLETS AND WIRING
ACCESSORIES, AND PLUG
THE MACHINE ONLY IN THE
A.C. 100V OUTLET.
If used exceeding ratings due to too many
wirings, heat is generated, resulting in fire.
WARNING
Page 3
SAFETY PRECAUTIONS
Be sure to observe
4H4C-E-PMA00-B03-00
M27E
DO NOT GIVE A
SHOCK TO THE ELEC-
TRICAL EQUIPMENTS.
There is a risk of an electric
shock, leak or malfunction of
the machine.
M23E
ONLY THE PERSON IN
CHARGE MUST
CHANGE THE DATA.
The machine may runaway or
malfunction.
The data must be changed
only by a trained specialist
in charge.
CAUTION