4H4CEPM.pdf - 第81页
Page 71 301 CM 4H4C-E-PMA01-A05-03 Mount Data 20. All data When ticking off “All data”, the mount data to be mounted at all the tables is displayed. 21. Each T able When ticking off “Each T able”, the mount data for each…
Page 70
Mount Data
7. BL
This is the block No. set in block attribute data.
8. No.
This shows a descriptive order in block data. ( 11-1)
9. Priority
Comparing the mount point with the other ones, you can specify whether to mount the chip at this
mount point earlier or later. For example, this is used to mount chips under the large chip.
10. MR
MR indicates whether mount point recognition is performed or not. To perform mount point
recognition, the mount point recognition data must be created.
11. Mounted Info
Whether the modular sort is executed is displayed. When it is executed, the information on the
sequence of the chosen data.
12. Sort flag
It is possible to clear the modular sort information. When it is cleared, the machine determines the
mount order automatically.
13. No
This shows the row No. of mount data. It does not show the mount sequence.
14. Turn No (Turn No. for each board)
In which turn the chip will be mounted is displayed. It is counted for each head while regarding
pick-up-recognition-mounting as one turn.
15. PickupSeq
This shows the pick-up order in each turn. (1 to 2)
16. MountSeq
This shows the mount order in each turn. (1 to 2)
17. NozzlePos
This shows the nozzle arrangement No. (1 to 2)
18. FeederAddress
This shows the address where the parts are set by using five-digit number. The first and second
numbers from the bottom show the address. The fifth one shows table No. The third one is always
0. The forth one indicates the distinction between right and left of the direct twin tray feeder.
19. side
This indicates in which lane the stick is set when the vibratory feeder is used.
4H4C-E-PMA01-A05-03
Page 71
301
CM
4H4C-E-PMA01-A05-03
Mount Data
20. All data
When ticking off “All data”, the mount data to be mounted at all the tables is displayed.
21. Each Table
When ticking off “Each Table”, the mount data for each table is displayed.
4H4C-EPt-EdMo-001
4H4C-EPt-EdMo-006
Page 72
14-2 Editing Mount Data
1. Click on MountData .
• [MountData] window opens.
• When sorting has been completed, block data
have already been expanded.
2. Check and modify the data.
• Use the same steps as those for block data.
( 11-2)
3. Click on Close .
• The main menu is displayed.
Mount Data
4H4C-E-PMA01-A05-03
4H4C-EPt-Ed-001
4H4C-EPt-EdMo-001