HS50_advance_level 1_20200522_221201 (1).pdf - 第212页
06/2002 E dition Studen t Guide H S-50 Advance d I 6 Operati ng the S IT ES T Softwa r e 28 6.5. 7 F unct io n of th e Revolver Head in the P l acement and P ick-up Circuit Segm ent Indicates the segment num ber. Open [m…
Student Guide HS-50 Advanced I 06/2002 Edition
6 Operating the SITEST Software
27
6.5.6 Functions of the Revolver Head in the Holding and Reject Circuit
Turning station
Swivel in
The swivel-in action of the dp drive is
activated. The sleeve is thereby turned.
Swivel out
The swivel-out action of the dp drive is
activated. The sleeve is thereby turned.
Initialize stepper motor
Swivels the dp station in and out.
Holding circuit
Vacuum in holding circuit
Checks the entire vacuum in the holding
circuit.The value measured is displayed
above the button.
Close nozzles
Closes the vacuum of the nozzles in the
holding circuit.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Reject circuit
Vacuum
Turns on/off the vacuum in the Reject circuit.
Air kiss
Turns on/off the vacuum in the reject circuit.
Initialize stepper motor
Moves the stepper motor into a defined
reference position. The valve plunger is
subsequently positioned at 'air kiss'.
Selects revolver
head 1-4.
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
28
6.5.7 Function of the Revolver Head in the Placement and Pick-up Circuit
Segment
Indicates the segment number.
Open [mbar]
Displays the value in mbar that was determined
by the vacuum test in the placement and pick-
up circuit, with the valve open.
Closed [mbar]
Displays the value in mbar that was determined
by the vacuum test in the placement and pick-
up circuit, with the valve closed.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Placement and pick-up circuit
Vacuum
On/Off
Turns on/off the vacuum in the placement circuit and/or pick-
up circuit.
Air kiss
On/Off
Turns on/off the air kiss in the placement circuit and/or pick-
up circuit.
Initialize stepper motor
Moves the stepper motor into a defined reference. The valve
plunger is subsequently positioned at 'air kiss'.
Test vacuum
Tests the vacuum for the nozzle currently set up in the
placement and pick-up circuit and displays - above the button
- the values measured with the valve both in open and closed
condition.
Measure vacuum
Checks the total value of the vacuum for the entire circuit.
The value measured is displayed above the button.
Step star axis
This function is used to index the
star. Every time you click on the
button the star is advanced by
one segment. The positions of the
individual segments are displayed
graphically on the screen.
Selects revolver
head 1-4.
Student Guide HS-50 Advanced I 06/2002 Edition
6 Operating the SITEST Software
29
6.5.8 Mapping Functions of the Revolver Head
The values x-ind, y-ind, xs[µm], ys[µm],
xd[µm] and yd[µm] describe the offset of
the mapping plate after the mapping run.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Selects revolver
head 1-4.
RV mapping
Conveyor 1/2
Selection of conveyor track 1/2 of the dual
conveyor.
Mapping plates
Selection of the mapping plates.
Start
Performs the mapping run with the selected
gantry on the selected conveyor track and
automatically saves the data dermined after
the mapping run has been completed.