HS50_advance_level 1_20200522_221201 (1).pdf - 第53页

Studen t Guide HS-50 A dvanced I 06/200 2 Edition 2 Overview 23 2.6. 1 Eleme n t s of th e pneu matic c age Fig. 2.6 - 2 Pneu mati c ca ge, E lem ent s of t he pn eumat ik un it 2.6. 2 Press ure values Fig. 2.6 - 3 Pneu …

06/2002 Edition Student Guide HS-50 Advanced I

2 Overview

2.5 Sector 2

Fig. 2.5 - 1 Sector 2, CAN bus adapter

2.6 Pneumatic Cage

Fig. 2.6 - 1 Pneumatic cage

CAN bus adapterPCB output side

Sector 2 contains the CAN bus adapter for the

changeover table of gantry 2

Right view (operator controls)

Pneumatic unit

The pneumatic unit is used to prepare and distribute the

compressed air required in the machine. The pressure in the

compressed-air connection is 5,1 bar with a consumption level of 1200 Nl/min

Student Guide HS-50 Advanced I 06/2002 Edition

2 Overview

2.6.1 Elements of the pneumatic cage

Fig. 2.6 - 2 Pneumatic cage, Elements of the pneumatik unit

2.6.2 Pressure values

Fig. 2.6 - 3 Pneumatic cage, Pressure values

Stopcocks for gantries (G1, G2, G3, G4)

Manometer (preset supply pressure)

Manometer (manually set supply for pressure)

Main cock for compressed air supply

Filter

After the machine has been

switched on, the valve block in

the pneumatic unit provides the

following supply pressures:

5,5 +/-0,5bar for

- the pneumatic cutting devices

- the PCB stoppers

- The nozzle changers

- the component changeover

tables

- the vacuum generators of the

gantries

2,5 +/- 0,5 bar for

- the bulk case feeder

06/2002 Edition Student Guide HS-50 Advanced I

2 Overview

2.7 Sector 1

Fig. 2.7 - 1 Sector1

2.8 Station Computer

Fig. 2.8 - 1 Station computer

PCB input side Sector 1

Sector 1 contains CAN bus adapter (1) for the changeover table of gantry 1, an additional SLIO

for the optional nozzle changers (2), and the conveyor control unit (3)

One of the main funktions of the station computer is to

provide a graphical user interface for operating the ma-

chine. It also acts as a communication interface between the Line computer and the machine

controller

Left view (main operator controls) Station computer