00198150-02_SM_TX_en.pdf - 第20页
1 Introduction 1.3 Other Instructions 20 Service Manual SIPLACE TX Series 06/2017 1.3.7 Release History Document SIPLACE TX-Series Service manual Edition Changes 11/2016 First edition 06/2017 Upgrade Amendments and suppl…
1 Introduction
1.3 Other Instructions
Service Manual SIPLACE TX Series 06/2017 19
1.3.6 Serial Number of the Machine
Fig.6: Serial number
The serial number of the machine can be found in two
places.
1. On the typeplate on the inside of the machine
frame at location1.
2. Above the main switch at location 2 behind the
cover.
1 Introduction
1.3 Other Instructions
20 Service Manual SIPLACE TX Series 06/2017
1.3.7 Release History
Document
SIPLACE TX-Series
Service manual
Edition Changes
11/2016 First edition
06/2017 Upgrade
Amendments and supplements
●
Safety notes:
– Coplanarity module sensor (update)
– What to do before starting work (improved description)
●
Various new spare parts for micron machines
●
Basic machine:
– Gas pressure absorbers (improved description)
●
SMPS:
– Contactor safety breaker (CSB) (improved description)
●
Electrical system and control:
– Cover fan (new parts)
●
Pneumatic system:
– Overview of pneumatic system (improved description)
– Setting the compressed air controller (improved description)
●
Gantry:
– Replacing the X axis/mounting bracket incremental encoder (improved descrip-
tion)
– Replacing the Y axis/mounting bracket incremental encoder (improved descrip-
tion)
– Head adapter for the MHCU (washers)
– Head interface (improved description)
– Temperature sensor (gap filler)
– Sensor module (improved description)
– Replacing the filter element (O-ring (removed, will be described in the mainten-
ance manual)
●
Conveyor:
– Toothed belts for conveyor drives (improved description)
– Fiber optic cable sensor (improved description)
– Fiducial rail (new chapter)
– Vacuum tooling (new chapter)
●
Placement heads:
– SIPLACE C&P20 P/M2 (modification for GigE, improved description, supple-
ment for C&P20M2)
– SIPLACE CPP / CPP M (supplement for CPPM)
●
COT insert:
– Work on the COT insert without complete removal of this (new)
– Empty tape duct (new parts)
●
Cutter:
– Replacing the cutter (improved description)
– Spacer, metal buffer (improved description)
●
Docking station:
– Power pack (voltage setting)
●
JEDEC tray feeder:
– SIPLACE JTF-ML2 (new module)
1 Introduction
1.4 Staff Qualifications and Training
Service Manual SIPLACE TX Series 06/2017 21
1.3.8 SIPLACE on the World Wide Web (WWW)
Log into our SIPLACE
®
homepage at http://www.siplace.com.
► You can choose between the German and English versions.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the SIPLACE User Group. Here you can call up
special information about our placement systems, e.g.
●
Technical documentation,
●
Technical information,
●
Spare parts lists etc.
Registration for the user group is very simple:
► Click the Register link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with USER ID and password.
1.4 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
1.5 Abbreviations
Abbreviation Description
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
C&P20, CP20 Collect&Place head with 20 segments
CPP Collect&Pick&Place head
CPx Collective term for CPP and CP20
DC Dual conveyor with two lanes
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
ET Single conveyor with one lane
Board Pick&Place
Board Board
NC Nozzle changers
TH TwinHead