00198150-02_SM_TX_en.pdf - 第8页
8 Service Manual SIPLACE TX Series 06/2017 Table Of Contents 13 Docking Station for Component Trolley .. 287 13.1 Docking Station for Component Trolley - Overview .. 287 13.2 Replacing the Power Pack [03121806-xx] .…
7Service Manual SIPLACE TX Series 06/2017
Table Of Contents
9 Nozzle Changers and Nozzle Stations.. 225
9.1 Nozzle Changers and Nozzle Stations - Overview.. 225
9.2 Replacing the Nozzle Changer.. 227
9.2.1 Setting the Nozzle Changer Height.. 228
9.3 Replacing Nozzle Station [03090348-xx].. 229
9.4 Replacing the Control Board Cable NC Valve [00334212-xx].. 231
10 COT Insert.. 233
10.1 COT Insert - Overview.. 233
10.2 Installation Positions of COT Insert (Table Positions).. 234
10.3 Replacing the COTi Central Unit and Lifting Mechanics.. 235
10.4 Replacing the 40-Fold Feeder Unlocking Device [03011582-xx].. 239
10.5 Replacing the Feeder Control Unit (FCU).. 241
10.5.1 Feeder Control Unit (FCU).. 243
10.6 Replacing the Empty Tape Duct Assembly [03052576-xx].. 244
10.7 Replacing Component Deposit [03117664-xx].. 247
11 Cutter.. 249
11.1 Cutter overview.. 250
11.2 Replacing the Waste Tape Chute [03125182-xx].. 251
11.3 Replacing the Cutter on the COT Insert [03066690-xx].. 252
11.4 Replacing the Metal Buffer/Spacer Distance Piece.. 255
11.5 Replacing the Baffle Plate [03019896-xx].. 257
11.6 Replacing the Protective Guard [03019894-xx].. 258
11.7 Replacing the Articulated Joint on the Short-Stroke Cylinder [03000518-xx].. 259
11.8 Replacing the Short-Stroke Cylinder [03038587-xx].. 262
11.9 Replacing the Cutter Blades.. 264
11.10 Replacing Wiper [03000491-xx].. 270
11.11 Replacing Wiper Clip.. 271
11.12 Replacing the Cutter Cable [03063590‑xx].. 273
11.13 Replacing the Throttle Valve [03000600-xx].. 274
11.13.1 Times for Setting the Throttle on the Cutter (From SW707.1).. 275
11.14 Replacing the Solenoid Valves [03000630-xx].. 276
11.15 Replacing the Silencer [00310744-xx].. 277
12 SIPLACE TX-Series Component Trolley.. 279
12.1 SIPLACE TX-Series Component Trolley - Overview.. 279
12.2 Replacing the Rollers.. 280
12.3 Replacing the Locking Latch [03069205-xx].. 280
12.4 Replacing the Guide Profile/Entering Guide Feeder.. 282
12.5 Replacing the Bearing Assembly (Centering Sleeve) [03103947-xx].. 283
12.6 Replacing the Actuator/Protective Bracket.. 284
12.6.1 Setting the Actuator on the Component Trolley.. 285
12.7 Replacing the Feeder Centering [03028910-xx].. 285
8 Service Manual SIPLACE TX Series 06/2017
Table Of Contents
13 Docking Station for Component Trolley.. 287
13.1 Docking Station for Component Trolley - Overview.. 287
13.2 Replacing the Power Pack [03121806-xx].. 288
13.3 Replacing the Microfuse [03033387-xx].. 289
13.4 Replacing the Locking Unit Short-Stroke Cylinder [03034831-xx].. 290
13.5 Replacing the Locking Lever [03025104-XX].. 291
13.6 Replacing the Positions End Switch of the Component Trolley Locking Device
[03033395-xx].. 292
13.7 Replacing the 40-Fold Feeder Unlock Device [03011582-xx].. 293
13.8 Replacing the Feeder Control Unit (FCU) [03059623Sxx].. 294
13.9 Replacing the Complete Coupling - Earthing and Compressed Air for the Bulk
Case.. 295
13.10 Replacing the Unlocking Pushbutton [00334095-xx].. 296
13.11 Replacing the Control Valve [03003489-xx].. 297
14 JEDEC Tray Feeder.. 299
14.1 SIPLACE JTF-ML.. 299
14.1.1 SIPLACE JTF-ML - Overview.. 299
14.1.2 Replacing the SIPLACE JTF ML Adapter [03114835-xx].. 300
14.1.3 Replacing the SIPLACE JTF-ML FDK [03110417‑xx].. 300
14.1.4 Replacing the Control Board X Adapter [03050293-xx].. 300
14.1.5 Replacing the EDIF [03013678-xx].. 305
14.1.6 Sliding Guides.. 308
14.1.6.1 Replacing the Long Guide Slide Bearing, Left [03003994-xx].. 309
14.1.6.2 Replacing the Slide Guides, Right [03058808Sxx].. 309
14.1.6.3 Replacing the Short Guide Slide Bearing, Left [03012425-xx].. 310
14.2 SIPLACE JTF-ML2.. 311
14.2.1 SIPLACE JTF-ML2 - Overview.. 311
15 Vacuum Pump.. 313
1 Introduction
1.1 Safety Instructions
Service Manual SIPLACE TX Series 06/2017 9
1 Introduction
This manual describes service work to be performed on SIPLACE® TX-Series machines.
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the Use of Safety Instructions and Symbols
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbols indicate actions that have to be performed by the operator.