00198150-02_SM_TX_en.pdf - 第64页
4 Electrical System and Control 4.2 Replacing the Control Computer BoxPC 64 Service Manual SIPLACE TX Series 06/2017 4.2 Replacing the Control Computer BoxPC Parts, equipment and tools Fig.66: BoxPC 427D ● Control compu…
4 Electrical System and Control
4.1 Electrical System and Control - Overview
Service Manual SIPLACE TX Series 06/2017 63
4 Electrical System and Control
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
NOTICE
Observe the detailed circuit diagrams!
For more detailed information refer to the circuit diagrams folder of your machine.
●
Detailed circuit diagrams folder for SIPLACE TX-Series (up to no. 499) [DE+EN: 00197933-
xx]
●
Detailed circuit diagrams folder for SIPLACE TX-Series (from no. 500) [DE+EN: 00198274-xx]
4.1 Electrical System and Control - Overview
Fig.65: Overview of electrics
1. Location 1
2. Location 2
3. Indicator lamps
4.7 "Indicator Lamps and Illumination" [}72]
4. Monitor
4.5 "Replacing the Monitor [03115169-xx]" [}69]
5. EMERGENCY STOP button
6. Start/Stop buttons
7. Cover fan
4.8 "Replacing the Cover Fan
[03110692-xx]" [}74]
8. Control Computer BoxPC
4.2 "Replacing the Control Computer
BoxPC" [}64]
– 4.3 "Replacing the RAM in the BoxPC" [}67]
– 4.4 "Replacing the GigE Ethernet Ad-
apter" [}68]
9. Main switch
10. Power supply (behind the cover)
11. Cover switch
4.6 "Replacing the Cover Switch
[03110691-xx]" [}70]
4 Electrical System and Control
4.2 Replacing the Control Computer BoxPC
64 Service Manual SIPLACE TX Series 06/2017
4.2 Replacing the Control Computer BoxPC
Parts, equipment and tools
Fig.66: BoxPC 427D
●
Control computer BoxPC 427D processor i3
2xPCIe [03114177‑xx]
CAUTION
Additional hardware for the BoxPC
The BoxPC is supplied without the following parts. If required, these must be removed from
the old BoxPC and fitted in the new one or ordered as new parts:
BoxPC 427D
GigE interface
(cameras)
GigE Ethernet adapter PCI-E I350T2V2BLK [03115569‑xx]
RAM
See 4.3 "Replacing the RAM in the BoxPC" [}67].
Ethernet adapter If a 3D Coplan or a barcode scanner is installed, the "LAN card PCI Ex-
press 2x Gigabit LAN" [03118416-xx] is needed in addition.
●
Installation manual for Windows Embedded Standard 7 [00197737-xx]
4 Electrical System and Control
4.2 Replacing the Control Computer BoxPC
Service Manual SIPLACE TX Series 06/2017 65
4.2.1 Replacing the BoxPC 427x
Overview
Fig.67: Waste tape chute
The BoxPC is located on location 1 behind the waste
tape chute(1).
Removal
► Backup the machine data.
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}15].
Fig.68: Waste tape chute
► Loosen the two safety screws(1) on the waste
tape chute and unhook the waste tape chute.
Fig.69: Fastening screws
► Remove the five fastening screws(2) fixing the
cover plate in front of the BoxPC(1).
► Remove the fastening screw(3) of the support
frame.