00198150-02_SM_TX_en.pdf - 第217页

8 Placement Heads and Stationary Cameras 8.5 Installation Positions on the Head Plate Service Manual SIPLACE TX Series 06/2017 217 8.5.6 Gantry 1 – Fixing Points for C&P20 P Fig.297: Gantry 1: C&P20P head 1 Fix…

100%1 / 316
8 Placement Heads and Stationary Cameras
8.5 Installation Positions on the Head Plate
216 Service Manual SIPLACE TX Series 06/2017
8.5.5 Gantry 1 – Fixing Points for TwinHead
Fig.296: Gantry 1: Twin head
1 Fixing points left twin module 2 Fixing points right twin module
8 Placement Heads and Stationary Cameras
8.5 Installation Positions on the Head Plate
Service Manual SIPLACE TX Series 06/2017 217
8.5.6 Gantry 1 – Fixing Points for C&P20 P
Fig.297: Gantry 1: C&P20P head
1 Fixing points for C&P20 P heads
2 Exchange these two pins if a CPP head was installed before.
See also 8.5.3 "Position of Screws on the Attachment Head Suspension" [}215].
8 Placement Heads and Stationary Cameras
8.5 Installation Positions on the Head Plate
218 Service Manual SIPLACE TX Series 06/2017
8.5.7 Gantry 1 – Fixing Points for CPP
Fig.298: Gantry 1: CPP head
1 Fixing points for CPP heads
2 Exchange these two pins if a C&P20P head was installed before.
See also 8.5.3 "Position of Screws on the Attachment Head Suspension" [}215].