00198140-01_UM_JTF-ML_TX12_de_en.pdf - 第66页

Introduction Module Description 1.1.2 EU Declaration of Conformity 66 JEDEC Tray Feeder (JTF-ML) 1.1.2 1 . 1 . 2 E U D e c la r a t io n o f C o n f o r m it y EU Declaration of Conformity The product/device described be…

Introduction

1.1.1 Typeplate and Serial Number Module Description

JEDEC Tray Feeder (JTF-ML) 65

1 Introduction

Introduction

This manual provides technical information and describes how to operate the JEDEC tray feeder in the

SIPLACE® TX-Series.

1.1

1.1 Module Description

Module Description

In SIPLACE TX machines, a SIPLACE JTF-ML can be installed at location 1. The SIPLACE JTF-ML is

fitted at the side.

Depending on the magazine type, the SIPLACE JTF-ML stores up to 18 standard or, as an option, 14

high JEDEC waffle pack tray magazines in an exchangeable cassette and supplies them as required.

The placement machine can therefore be supplied with different component types at variable changeo-

ver times.

1.1.1

1.1.1 Typeplate and Serial Number

Typeplate and Serial Number

Typeplate

The feeder modules have a typeplate, which specifies the

type, material and serial number.

▪ Type: SIPLACE JTF-ML

▪ Material No./Material-Nr.: 00588105

▪ Serial No.:0001

Typeplate on SIPLACE JTF-ML

The typeplate (1) is located on the side of the SIPLACE

JTF-ML.

Introduction

Module Description 1.1.2 EU Declaration of Conformity

66 JEDEC Tray Feeder (JTF-ML)

1.1.2

1.1.2 EU Declaration of Conformity

EU Declaration of Conformity

The product/device described below conforms to the regulations and standards listed in the EU Decla-

ration of Conformity provided.

Manufacturer:

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany

1.1.3

1.1.3 Correct Usage

Correct Usage

The product may only be used for the application cases described in the catalogues and technical spec-

ifications i.e. for placement of SMD components and only in connection with the third party devices and

components recommended or approved by SIPLACE.

Any other use is deemed to be incorrect and not as prescribed.

If the product is not used as prescribed, SIPLACE will accept no liability for any damage that may occur

and will not guarantee that the components will work properly and without problems.

Prescribed or correct usage includes the observance of all the instructions in the user manual.

The proper and safe operation of the product requires correct transportation, storage, installation and

assembly, plus careful, accurate utilization and servicing.

1.1.4

1.1.4 Incorrect Usage

Incorrect Usage

Failure to use the product as prescribed can result in both danger to life and limb and material damage.

For this reason, non-prescribed usage is prohibited. If the product is not used as prescribed, ASM As-

sembly Systems GmbH & Co. KG will not accept liability for any damage that may occur and will not

guarantee that the components will work properly and without problems.

Non-prescribed use of the module includes the following examples:

▪ Operation of the module with safety equipment deactivated or removed.

▪ Placement of components that do not meet the permitted specification.

▪ Use of unauthorized accessories and additional modules.

▪ Use of the module by unqualified personnel.

1.1.5

1.1.5 Noise Emissions

Noise Emissions

Model JEDEC tray feeder

Type SIPLACE JTF-ML

Item no.: 00588105- xx

Maximum noise level 75 dB (A)

Introduction

1.1.6 Environmentally-Friendly Disposal of Materials and Components Important Notes about the Operating Manual

JEDEC Tray Feeder (JTF-ML) 67

1.1.6

1.1.6 Environmentally-Friendly Disposal of Materials and Components

Environmentally-Friendly Disposal of Materials and Components

SIPLACE products are manufactured using only materials and parts that can be easily separated and

disposed of in an environmentally-friendly way.

1.1.7

1.1.7 Electromagnetic Compatibility (EMC)

Electromagnetic Compatibility (EMC)

All SIPLACE products are designed and tested for professional use in industrial applications. Electro-

magnetic compatibility in terms of the emission of interference cannot be guaranteed in any other envi-

ronment.

1.1.8

1.1.8 Use of Original SIPLACE Accessories and Spare Parts

Use of Original SIPLACE Accessories and Spare Parts

Only use original spare parts and authorized accessories. The use of other parts will affect safety and

will invalidate the liability for any consequential damage.

1.2

1.2 Important Notes about the Operating Manual

Important Notes about the Operating Manual

1.2.1

1.2.1 Contents and Filing of this Manual

Contents and Filing of this Manual

This user manual contains basic information that must be observed when setting up, operating and main-

taining the machine. The service engineers, qualified staff, operators and users must therefore read it

before commencing installation and commissioning. The instructions must be kept permanently acces-

sible wherever the machine is used.

In addition, the user must ensure that the employees have fully understood the contents of the user man-

ual.

1.2.2

1.2.2 Danger Notes

Danger Notes

1.2.3

1.2.3 Liability of the Manufacturer/Supplier

Liability of the Manufacturer/Supplier

We draw your attention to the fact that these instructions only contain descriptive and explanatory ma-

terial and do not include any contractual conditions or undertakings. All obligations of ASM Assembly

Systems GmbH & Co. KG are conclusively specified in the respective contract, on the basis of which you

have received the machine described therein. This applies in particular to all statements regarding per-

formance or service life and the agreed liability for faults or defects. The provisions of the contract re-

garding the liability for faults or defect are neither extended nor restricted by any statements in this

manual.

NOTICE

Observe the applicable regulations

The company operating the system has sole responsibility for the proper, environmentally-

friendly disposal of machines, working materials, consumables and wear parts.

► Please observe your national statutory provisions for waste disposal and environmental

protection.

WARNING

Danger notes

► Work may only be performed on the JEDEC tray feeder if the personnel concerned have a

thorough knowledge of the relevant section of the user manual.

► All work must be carried out by appropriately trained and qualified personnel.

► All warnings, cautions and hazard notes must be observed.

► Carefully read through Chapter 2 on operational safety in the user manual for this purpose.