00198140-01_UM_JTF-ML_TX12_de_en.pdf - 第70页
Introduction Important Notes about the Operating Manual 1.2.6 Abbreviations 70 JEDEC Tray Feeder (JTF-ML)
Introduction
1.2.6 Abbreviations Important Notes about the Operating Manual
JEDEC Tray Feeder (JTF-ML) 69
1.2.6
1.2.6 Abbreviations
Abbreviations
Abbreviations Description
C&P Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
CPP Collect&Pick&Place head
CPx Collective term for CPP, CP20, CP12 and/or CP6
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
JTF JEDEC tray feeder
P&P Board
P&P Pick&Place
SC Station computer
TH TwinHead
Introduction
Important Notes about the Operating Manual 1.2.6 Abbreviations
70 JEDEC Tray Feeder (JTF-ML)
Operational Safety
2.1.1 Conventions for the use of safety instructions Safety information
JEDEC Tray Feeder (JTF-ML) 71
2
2 Operational Safety
Operational Safety
2.1
2.1 Safety information
Safety information
Nonobservance of these safety instructions may cause injury to personnel and damage to the machine
2.1.1
2.1.1 Conventions for the use of safety instructions
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord-
ing to the level of risk:
2.1.2
2.1.2 Staff Qualifications and Training
Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up, op-
eration and maintenance and are suitably qualified, e.g.:
▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical
circuits and system components in accordance with normal safety standards.
▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-
ance with normal safety standards.
▪ Have received first aid training.
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the user manual of the relevant machine for all
work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.