00195376-05_SM_D1_D1i_D2_D2i_EN.pdf - 第198页
Measuring Equipmen t and Tools Compressed Air Testing Device [00311487-01] 5.1.1 Scope of Delivery 198 Service Manual SIPLACE D1/D1i/D2/D2i 5.7 5 . 7 C o m p r e s s e d A ir T e s t in g D e v ic e [ 0 0 3 1 1 4 8 7 - 0…
Measuring Equipment and Tools
5.1.1 Scope of Delivery Track Signal Tester [00343785-01]
Service Manual SIPLACE D1/D1i/D2/D2i 197
5.4
5.4 Track Signal Tester [00343785-01]
Track Signal Tester [00343785-01]
5.5
5.5 Track Signal Tester [00322510-01]
Track Signal Tester [00322510-01]
5.6
5.6 Belt Tension Device [00326015-01]
Belt Tension Device [00326015-01]
Use:
The track signal tester is used to test the track signals of
the incremental measurement system for the gantry axes
(from SIPLACE HS50).
Use:
The track signal tester is used to test the track signals of
the incremental measurement system - particularly for
the head axes. It is also used for the track signals of the
gantry axes on older SIPLACE machines (S20, F4).
Use:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.
Measuring Equipment and Tools
Compressed Air Testing Device [00311487-01] 5.1.1 Scope of Delivery
198 Service Manual SIPLACE D1/D1i/D2/D2i
5.7
5.7 Compressed Air Testing Device [00311487-01]
Compressed Air Testing Device [00311487-01]
5.8
5.8 Location Tester
Location Tester
Use:
The compressed air tester is used to set the air blast at
the C&P6 and C&P12 placement heads in the SIPLACE
placement machines.
Use:
The location tester is used to check the feeder connec-
tions at the communication unit of the changeover table.
Measuring Equipment and Tools
5.1.1 Scope of Delivery Z End Stopper Star Gauge for C&P6/12 03019865-xx
Service Manual SIPLACE D1/D1i/D2/D2i 199
5.9
5.9 Z End Stopper Star Gauge for C&P6/12 03019865-xx
Z End Stopper Star Gauge for C&P6/12 03019865-xx
5.10
5.10 Adjustment Aid for C&P DLM 00327005-xx
Adjustment Aid for C&P DLM 00327005-xx
Use:
The gauge is used to set the end stop position of the C&P
head Z axis.
Complete set [00327005-xx]
1. Gauge for star [00326164-xx]
2. Test probe 1.4 mm [00326160-xx]
3. Test probe 1.5 mm [00326161-xx]
4. Test probe 1.6 mm [00326162-xx]
5. Test probe 1.0 mm [00376656-xx]
6. Distance gauge [00325445-xx]
Measurement tools Application type
Gauge for star Setting the zero point correction for the star
Test probe 1.4 mm Setting the distance between the DP station incremental encoder and the glass
for the sleeve
Test probe 1.5 mm
Test probe 1.6 mm
Test probe 1.0 mm Setting the distance from the Z axis light barrier down to the sleeve shaft
Distance gauge Setting the distance of the valve plunger to the star