00195376-05_SM_D1_D1i_D2_D2i_EN.pdf - 第41页
Overview 3.5.6 Overview of Settings Cutter Service Manual SIPLACE D1/D1i/D2/D2i 41 3.7 3 . 7 C u t t e r Cutter Overview Overview of Settings Legend 1. Tape c utter, pneu matic 2. Short-stroke cylinder 3. Control unit 4.…
Overview
Pick&Place Head 3.5.6 Overview of Settings
40 Service Manual SIPLACE D1/D1i/D2/D2i
P&P head – viewed from two sides
Legend
Overview of Settings
1 Z-axis drive 5 Compressed air connection to rotary axis
2 Z-axis incremental encoder 6 D-axis drive under the board
3 Vacuum control system 7 Label with Z-axis parameters
4 Return unit
Description Tools and equipment Values
Distance between incremental encoder and incre-
mental scale
Plastic gauge 0.4 mm; 0.4mm
Overview
3.5.6 Overview of Settings Cutter
Service Manual SIPLACE D1/D1i/D2/D2i 41
3.7
3.7 Cutter
Cutter
Overview
Overview of Settings
Legend
1. Tape cutter, pneumatic
2. Short-stroke cylinder
3. Control unit
4. Solenoid valves
2
4
1
4
3
2
Description Tools and
equipment
Values
Control unit jumper settings - See "6.9.1 Jumper setting on the control unit at the tape
cutter" [ ➙ 278].
Overview
Changeover Table 3.5.6 Overview of Settings
42 Service Manual SIPLACE D1/D1i/D2/D2i
3.8
3.8 Changeover Table
Changeover Table
Overview: changeover table structure (D1/D2)
Legend
Overview of Settings
1 Moveable base with fixed and guide castor 5 Communication unit
2 Tape reels container 6 Table plate
3 Tape waste container 7 Switch for lowering the changeover table
4 Handle 8 Area for excess partition plates or setup
lists
Description Tools and equipment Values
Set up changeover tables
at machine height
Suitable lifting device and
eyebolt
See D1/D2 operating manual.
Move changeover table
supply line for location.
Changeover table option:
raising and lowering can
only be performed when the
table is docked.
Before the table is lowered, the table supply
line is attached to the required side of the ta-
ble. The table is then moved in, connected
and lowered.