00195376-05_SM_D1_D1i_D2_D2i_EN.pdf - 第57页

Service Work 4.1.4 Replacing the A364 Axis Card Electrical System Service Manual SIPLACE D1/D1i/D2/D2i 57 4.1.4 4 . 1 . 4 R e p la c in g t h e A 3 6 4 A x is C a r d Replacing the A364 Axis Card Adapter cable harn e ss …

Service Work

Electrical System 4.1.3 Replacing the Axis Unit with Adapter Cable (X, D Series)

56 Service Manual SIPLACE D1/D1i/D2/D2i

► Fit the adapter cable harness (2) holder to the left in-

side panel of the axis unit, with the two screws

provided (1).

Axis unit, new

► Connect the adapter harness connectors to the con-

nection points in the new axis unit, as follows:

1. Connection for connector X11_3*q

2. Connection for connector X47*q

3. Connection for connector X08_3*q

4. Connection for connector X46*q

5. Connection for connector X09_3*q

6. Connection for connector X42_1*q

7. Connection for connector X41_1*q

8. Connection for connector X04_3*q

9. Connection for connector X03_3*q

10. Connection for the ballast resistance

11. Four connections X and Y motors for the connectors

(from top to bottom) X4tr, X4tt, X4ur and X4ut.

Two or four connections are used, depending on the

machine type.

12. Connection for connector X10_3*q

13. Connection for connector X07_3*q

14. Connection for connector X1we

15. Connection for connector X12_3*q

16. Connection for connector X45*q

17. Connection for connector X2we

► Reconnect the cables for the X and Y motor (11) con-

nections with cable clamps, to the back of the axis

unit.

Service Work

4.1.4 Replacing the A364 Axis Card Electrical System

Service Manual SIPLACE D1/D1i/D2/D2i 57

4.1.4

4.1.4 Replacing the A364 Axis Card

Replacing the A364 Axis Card

Adapter cable harness

► Connect the Harting connector (1) of the adapter ca-

ble harness to the relevant connection point on the

machine.

► Hook the axis unit back into the guide rail in the ma-

chine. Carefully stow the cables in the machine.

CAUTION!

Make sure you do not damage any cables. Pay particular

attention to the lower part of the flat ribbon cable harness

(1). Make sure this does not rub against any parts.

► Push the axis unit into the machine and fit the protec-

tive cover.

► Switch the machine back on and perform a function

test.

NOTICE

The axis cards may only be replaced by SIPLACE service technicians.

► Contact your local SIPLACE service team.

Service Work

Electrical System 4.1.5 Replacing the Servo Card

58 Service Manual SIPLACE D1/D1i/D2/D2i

4.1.5

4.1.5 Replacing the Servo Card

Replacing the Servo Card