4M184002w_F8S.pdf - 第108页

4OM-1840 1-4-33 1604-001 4.7 Head Section 4.7.8 Head U/D Ball Screw (high-speed multi-purpose head) Cleaning and Oiling Cycle : Every 3 Months (Required Time : 5 minutes) Grease : DAPHNE GREASE MP No.1 Head U/D Ball Scre…

4OM-1840

1-4-321604-001

4.7.7 Vacuum Filter Change

Cycle : Every 3 Months (Required Time : 30 minutes)

Filter Holder

Fig. 4A4-43

Procedure

  

removal jig.

 

Filter Holder

Filter

Fig. 4A4-44

NOTICE

Make sure of the lter folder insertion direction, and

then insert the folder securely to the end.

Make sure that the lter folder upper surface is

aligned with the top block upper surface.

4.7 Head Section

4OM-1840

1-4-331604-001

4.7 Head Section

4.7.8 Head U/D Ball Screw (high-speed multi-purpose head) Cleaning and

Oiling

Cycle : Every 3 Months (Required Time : 5 minutes)

Grease : DAPHNE GREASE MP No.1

Head U/D Ball Screw (HL Axis)

Fig. 4A4-44-1

Procedure

(1) Wipe old grease out using a rag.

(2) Apply grease in the ball screw groove slightly using the syringe.

Note

Use No. 19 (brown) nozzle.

No.19

Fig. 4A4-44-2

 

manual axis operation to smooth the grease.

4OM-1840

1-4-341604-001

4.7 Head Section

4.7.9 Head U/D Linear Guide (HL Axis) Cleaning and Oiling

Cycle : Every 3 Months (Required Time : 5 minutes)

Grease : DAPHNE GREASE MP No.1

Head U/D Linear Guide (HL Axis)

Fig. 4A4-44-3

Procedure

(1) Wipe old grease out using a rag.

(2) Apply grease in the linear guide groove slightly using the syringe.

Notice

Apply grease, taking care that the grease does not stick to the

sensor.

Note

(a) Use No. 19 (brown) nozzle.

(b) Grease should be applied every 3 months after the initial month.

No.19

Fig. 4A4-44-4

manual axis operation to smooth the grease.