4M184002w_F8S.pdf - 第13页
Safety Precautions Safe-4 1OM-1840 1604-001 3. Common Precautionary Items Always wear safety gear when operating or servicing equipment. Helmet : Use during maintenance work Safety glasses or goggles : Use around light…
Safety Precautions
Safe-3
1OM-1840
1604-001
3. Common Precautionary Items
3. Common Precautionary Items
Precautions before Use
Only a well-trained person should operate the machine.
Do not allow any untrained person to operate the machine.
Mishandling of the machine can cause a serious accident.
Before operating the machine, please read the instruction manual carefully for correct
operations.
Although the precautionary items have been reviewed repeatedly, an incident far beyond
our expectation may occur.
Not only follow the precautionary instructions described in the instruction manual but
also try to handle the machine carefully at your discretion all the time.
Conrm that no covers are disengaged before operating the machine.
If the machine is used with its cover(s) being detached, a serious accident may
occur.
Be sure to attach them in place.
Make certain that no person or object comes in contact with the moving
mechanisms of the machine. Then, check safety and power up the machine to
start operation.
Do not start the machine unless those working in the immediate area of the
machine are aware of hazards from moving parts.
Those who wear implanted pacemakers are not allowed to work inside the
machine.
This machine uses strong permanent magnets in the moving areas of the X/Y
beams.
The pacemaker may be aected by the magnetism and a serious accident will
result.
Those who wear implanted pacemakers are not allowed to handle the tape
feeders.
The pacemaker may be aected by the magnetism and a serious accident will
result.
If the bank feeder change cart is not set, a clearance will be left at the feeder
setting area and the operator will be exposed to danger.
Be sure to use the machine with the bank feeder change cart being connected.
Safety Precautions
Safe-4
1OM-1840
1604-001
3. Common Precautionary Items
Always wear safety gear when operating or servicing equipment.
Helmet : Use during maintenance work
Safety glasses or goggles : Use around light harmful to eyes and when applying
lubricant, etc.
Respiratory gear : Use when handling organic solvents
Safety gloves : Use when applying lubricant, etc.
Even after the [EMERGENCY STOP] switch is pressed, note that electrical
power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to "OFF".
the customer side.
Emergency Switch Stop : Emergency Interception of Controlled Load Power Sources
In principle, the overall operation of the machine including the button operations
on the operation panel and the touch screen must be controlled by only one
person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the hard disk data be periodically backed up with the
network terminal (option).
authorized maintenance personnel.
Be sure to strictly keep the above-mentioned instructions. Otherwise, not only wrong
operations of the machine but also personal injury will result.
Safety Precautions
Safe-5
1OM-1840
1604-001
3. Common Precautionary Items
Notes on Machine Operations
Please keep the instruction manual in a safe place within reach.
Follow the instructions in the instruction manual for correct handling of the machine.
Be sure to fully understand the contents of the safety instructions in the instruction
manual and follow the instructions.
Please pay special attention to the precautionary items labeled on the machine or
described in the instruction manual and be sure to keep them. When the precautionary
items are ignored, it will result in personal injury or property damage (damage to the
machine).
Be sure to follow the operational instructions described in the instruction manual.
machine. Be sure not to use the machine with its safety devices detached. Doing
otherwise may cause personal injury.
Also, be sure not to change the setting of the operating system nor install any software
additionally.
Do not perform any operations other than those described in the instruction manual.
Whenever a problem arises, regarding the machine operations, performance, etc., please
contact the marketing department or sales agency of Yamaha Motor Co., Ltd. for the
solution.
This machine uses energetic driving systems and high voltage to run at high
speed. This power and voltage is high enough to cause death or serious injury.
To avoid this danger, respect the following guideline.
• The machine must be used with the covers being attached.
• Be sure to close the transparent covers (door type) before operating the
machine.
• Do not disengage the interlock mechanism of the transparent covers (door
type).
Whenever you feel danger or abnormality, immediately press the [EMERGENCY
STOP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a breakdown
will result.