4M184002w_F8S.pdf - 第22页
Safety Precautions Safe-13 1OM-1840 1604-001 4. Alert Indications in Instruction Manual Alert Indications described as " CAUTION " (continued) Alert Description Related Items Strong Magnetism • Do not bring any…
Safety Precautions
Safe-12
1OM-1840
1604-001
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and nger injuries.
•
transparent covers.
•
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
the machine (especially, the other side of the machine operation) and no
objects such as tools and parts are left around the machine.
"3.2" in
"Chapter 1 (Vol. 1)"
"1.1.4" and
"4.1" in
"Chapter 3 (Vol. 1)"
Depending on the setting for the PCB discharge from the input machine
to this machine or from this machine to the output machine, the
conveyor may move at the moment when the PCB has been removed.
"3.2" in
"Chapter 1 (Vol. 1)"
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-13
1OM-1840
1604-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine. Such an object can easily be aected by
the magnetism.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"3.4" in
"Chapter 1 (Vol. 1)"
When a tape feeder is attached or detached, be sure not to drop
it.
Otherwise, a foot injury will result or the feeder itself may be damaged.
Carefully handle each feeder one by one and do not drop any.
"3.8" in
"Chapter 1 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
"3.1" in
"Chapter 3 (Vol. 1)"
"3.4.2" in
"Chapter 3 (Vol. 1)"
Hazardous to your hands and ngers!
•
Be sure to hold the handle to move the bank feeder change cart.
•
Be careful not to hit your hand against the cover while installing the
bank feeder change cart onto the main machine.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Hazardous to your hands and ngers!
•
Be sure to hold the handle to move the bank feeder change cart.
"2.2.4" in
"Chapter 3 (Vol. 1)"
Safety Precautions
Safe-14
1OM-1840
1604-001
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
Watch your step!
•
Be careful not to hit your foot against the cart while moving the bank
feeder change cart.
Especially, the resistance against cart movement may change rapidly
a sheet is used and the cart gets caught at the edge or a slackened
portion of the sheet.
•
Make sure to insert the feeder into the deep end.
When the tape feeder is mounted onto the feeder carriage, make sure
fall, which might cause a lower leg injury or damage to the feeder.
"3.8.1" in
"Chapter 1 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
Do not put your hand in the moving area while the feeder base is
moving up or down.
While the LED of the Feeder Ready switches are
indicates that the corresponding feeder base is moving up and down.
"2.2.5" in
"Chapter 1 (Vol. 1)"
When you need to bend down to perform work, you may hit your
head on the tape feeder worktable and get injured.
"2.2.6.1" in
"Chapter 3 (Vol. 1)"
When the tape feeder connecting cable is connected to the tape
feeder, unless the tape feeder is held securely, the tape feeder
holding guide may come o and drop from the tape feeder unit.
Connect the cable with the tape feeder held securely.
"2.2.6.1" in
"Chapter 3 (Vol. 1)"
There are some heavy feeder models. When such feeders are
removed with one hand, the weight of the feeder removed from
the guide cannot be supported by one hand and the feeder might
drop. Remove the feeder using both hands to support it.
"2.2.6.2" in
"Chapter 3 (Vol. 1)"
4. Alert Indications in Instruction Manual