4M184002w_F8S.pdf - 第259页

Error ID Error Name, Description, Cause, and Remedy 4b3102 Cutter(Servo Error) Overload Alarm Check out motor wiring or replace both motor and driver . Either , Conrm whether there is chocked up with cutter pieces. Plea…

Error ID Error Name, Description, Cause, and Remedy

4b3013 Cutter Error

Communication status Error(Stand by)

Please conrm AE-LINK wiring and Power wiring.

4b3014 Cutter Error

Communication Status Error(Alarm)

Please conrm the wiring of driver in Feeder Base unit

4b3015 Cutter Error

Communication Status Error(OT)

Please conrm the wiring of Origin Sensor.

4b3016 Cutter Error

Communication Status Error(Connection O)

Please conrm AE-LINK wiring and Power wiring.

4b3017 Cutter Error

Communication Status Error(Driver Alarm)

Please conrm the wiring of driver in Feeder Base unit

4b3018 Cutter Error

Communication Status Error(SV-NET stopping)

Please conrm AE-LINK wiring and Power wiring.

4b3019 Cutter Error

Communication Status Error(Out of Connection number)

Please conrm AE-LINK wiring and Power wiring.

4b301a Cutter Error

Communication Status Error(SV-NET Error)

Please conrm AE-LINK wiring and Power wiring.

4b301b Cutter Error

Cutter-axis is not connected.

Please conrm AE-LINK wiring and Power wiring.

4b301c Cutter Error

Failed to start-up Communication of SV-NET

Please conrm AE-LINK wiring and Power wiring.

4b301d Cutter Error

Failed to reset Alarm of Cutter-axis

----

4b301e Cutter Error

It returned to its Origin because Alarm of Cutter-axis was detected during

Positioning

Please check Feeder whose Number is close one indicated.

4b301f Cutter Error

Cannot turn on the servo motor of cutter unit within a specied time.

----

4b3101 Cutter(Servo Error)

Error of Power Driver, Over-current

Check out motor wiring or exchange both motor and driver.

3.8 Others

4OM-1840

3-3-971604-001

Error ID Error Name, Description, Cause, and Remedy

4b3102 Cutter(Servo Error)

Overload Alarm

Check out motor wiring or replace both motor and driver.

Either, Conrm whether there is chocked up with cutter pieces.

Please check it because there is a possibility that the fuse in cutter-axis is

broken.

4b3103 Cutter(Servo Error)

Speed Alarm

Need to adjust motor gain again.

4b3104 Cutter(Servo Error)

Multi-rotation Error

Check motor wiring or exchange motor.

4b3105 Cutter(Servo Error)

The value of Deviation Counter was over the set value

Check the wiring of Origin sensor. Either, replace a driver.

Please check it because there is a possibility that the fuse in cutter-axis is broken.

4b3106 Cutter(Servo Error)

Power Drive detected temperature error.

Ambient Temperature is too high. Exchange driver.

4b3107 Cutter(Servo Error)

Sensor Error

Conrm the wiring of Motor Encoder. Either, exchange motor

4b3108 Cutter(Servo Error)

High Drive voltage

Insucient power capacity. Exchange driver.

4b3109 Cutter(Servo Error)

Low drive voltage

Please conrm the operating Power wiring which is inserted to driver.

4b310a Cutter(Servo Error)

Reading Error on permanent memory

Exchange Driver

4b310b Cutter(Servo Error)

Reading Error on permanent memory

Exchange Driver

4b310c Cutter(Servo Error)

CPU Error

Exchange Driver

4b310d Cutter(Servo Error)

Parameter Error

Please conrm the changed Parameter

4b310e Cutter(Servo Error)

Alarm code readout failed

-----

3.8 Others

4OM-1840

3-3-981604-001

Error ID Error Name, Description, Cause, and Remedy

4b310f Cutter(Servo Error)

Low driving voltage(Block1)(Feeder Base [ON])

-----

4b3110 Cutter(Servo Error)

Low driving voltage(Block2)(Feeder Base [ON])

-----

4b3111 Cutter(Servo Error)

Low driving voltage(Block1)(Feeder Base [OFF])

-----

4b3112 Cutter(Servo Error)

Low driving voltage(Block2)(Feeder Base [OFF])

-----

4b3201 Servo Motor Error

Error of processing Servo On

-----

4b3202 Servo Motor Error

Time-out of processing Servo On

-----

4b3203 Servo Motor Error

Error of processing Servo O

-----

4b3204 Servo Motor Error

Time-out of processing Servo O

-----

4b3205 Servo Motor Error

Time-out of processing Servo On(Block1)

Please restart the machine.

4b3206 Servo Motor Error

Time-out of processing Servo On(Block2)

Please restart the machine.

4b3301 Data Communication Error

failed in data expansion

There is a possibility of following errors

1. Communication Error

2. Data loss

Please contact the service when not repaired even if turns it on again.

4b3401 Nozzle check Error before Pickup(Detected before operating)

It stopped because the remains components on the nozzle or adhering matters on

the linear measure sensor of Light Emitter/Receiver were detected.

The remains Component on a nozzle or aw and soil on Light Emitter/Receiver of

Linear measure Sensor could be considered to adhere. Please clean it up.

3.8 Others

4OM-1840

3-3-991604-001