4M184002w_F8S.pdf - 第92页
4OM-1840 1-4-17 1604-001 4.5.1 Feeder Base Upper Surface Groove Cleaning Cycle : Every Week (Required Time : 2 minutes) Groove on Feeder Base Fig. 4A4-22 Procedure Suck dirt and dust with a vacuum cleaner . 4.5 Feeder Ca…
4OM-1840
1-4-161604-001
4.5 Feeder Cart Section
NOTICE
Do not blow air to cleaning sections with an air gun.
When the air is blown, dirt or dust inside the machine
will disperse, which may adhere to the sensors,
control boards and moving mechanisms causing
machine failures.
Groove on Feeder Base
Every Week Cleaning
Required Time:2minutes
Upper Surface of Feeder Base
Every Day Cleaning
Required Time:2minutes
Reel Box
Every Day Cleaning
Required Time:5minutes
Scrap Box
Every Day Cleaning
Required Time:1minute
Fig. 4A4-20
4.5 Feeder Cart Section
4OM-1840
1-4-171604-001
4.5.1 Feeder Base Upper Surface Groove Cleaning
Cycle : Every Week (Required Time : 2 minutes)
Groove on Feeder Base
Fig. 4A4-22
Procedure
Suck dirt and dust with a vacuum cleaner.
4.5 Feeder Cart Section
4OM-1840
1-4-181604-001
4.5.2 Feeder Base Upper Surface Cleaning
Cycle : Every Day (Required Time : 2 minutes)
Upper Surface of Feeder Base
Fig. 4A4-23
Procedure
Remove foreign substances and unrequired components with a vacuum cleaner
4.5 Feeder Cart Section