4M184002w_F8S.pdf - 第86页
4OM-1840 1-4-1 1 1604-001 4.3.1 Component Recognition Camera Cleaning Cycle : Every Day (Required Time : 4 minutes) Component Recognition Camera (4 locations) Fiducial Mark Block Fig. 4A4-13 Procedure (1) Remove any drop…
4OM-1840
1-4-101604-001
4.3 Component Recognition Camera Section
NOTICE
Do not put your hand onto the ducial mark block.
If too much force is given to the ducial mark block it
may become deformed.
Fiducial Mark Block
Component Recognition Camera
(4 locations)
Every Day Cleaning
Required Time: 4 minutes
Fig. 4A4-11
Fiducial Marks (4 locations)
Every Week Cleaning
Required Time: 2 minutes
Component Storage Box
Every Day Cleaning
Required Time: 1 minute
Fig. 4A4-12
Note
These options are selected together with the SIGMA-F8S high-speed
multi-purpose head as a factory set when the system is delivered from the
factor.
4.3 Component Recognition Camera Section
4OM-1840
1-4-111604-001
4.3.1 Component Recognition Camera Cleaning
Cycle : Every Day (Required Time : 4 minutes)
Component Recognition
Camera (4 locations)
Fiducial Mark Block
Fig. 4A4-13
Procedure
(1) Remove any dropped component, etc., using the vacuum tweezers.
Note
G -S047-01 Adhesive Cleaner (Part No: 226J2091) is also available as an option
Adhesive Cleaner
Fig. 4A4-14
Notice
Use a suction force such as a vacuum cleaner for the cleaning.
Do not blow air to any cleaning section with an air gun.
When air is blown, the dirt and dust inside the machine will disperse,
causing the recognition system and the machine to malfunction.
4.3 Component Recognition Camera Section
4OM-1840
1-4-121604-001
4.3.2 Rejected Component Box Cleaning
Cycle : Every Day (Required Time: 1 minute)
Rejected Component Box
Fig. 4A4-15
Procedure
Remove components collected in the box.
NOTICE
Before removing the accumulated components from
the box, eliminate the static electricity from your
body.
Otherwise, some components may be damaged due
to static electricity.
Notice
Use a suction force (of a vacuum cleaner) for the cleaning.
Do not blow air to any cleaning section with an air gun.
When the air is blown, dirt or dust inside the machine will disperse,
causing a malfunction in the recognition or machine operation.
4.3 Component Recognition Camera Section