4M184002w_F8S.pdf - 第20页
Safety Precautions Safe-1 1 1OM-1840 1604-001 Alert Indications described as " W ARNING " (continued) Alert Description Related Items Pay close attention to the cutter blade during the maintenance work. • Lack …
Safety Precautions
Safe-10
1OM-1840
1604-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
WARNING
"
Alert Description Related Items
Be sure to keep the all transparent covers closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in
"Chapter 1 (Vol. 1)"
Before performing maintenance work, shut o the power breaker
and lock the power breaker with the padlock.
"2.3.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be aected by the magnetism and a serious
accident will result.
"3.4" in
"Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being attached.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be aected by the magnetism and a serious
accident will result.
"1.2.2" in
"Chapter 3 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
tasks carefully through the specied procedures.
"1.1" in
"Chapter 1 (Vol. 4)"
Before maintenance work, shut o the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol. 4)"
Safety Precautions
Safe-11
1OM-1840
1604-001
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in performing the work.
•
Be sure to attach the cutter blade cover to the cut unit during
the maintenance work for safety purposes.
"3.2.6" in "Chapter
1 (Vol. 4)"
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-12
1OM-1840
1604-001
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and nger injuries.
•
transparent covers.
•
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
the machine (especially, the other side of the machine operation) and no
objects such as tools and parts are left around the machine.
"3.2" in
"Chapter 1 (Vol. 1)"
"1.1.4" and
"4.1" in
"Chapter 3 (Vol. 1)"
Depending on the setting for the PCB discharge from the input machine
to this machine or from this machine to the output machine, the
conveyor may move at the moment when the PCB has been removed.
"3.2" in
"Chapter 1 (Vol. 1)"
4. Alert Indications in Instruction Manual