4M184002w_F8S.pdf - 第91页

4OM-1840 1-4-16 1604-001 4.5 Feeder Cart Section NOTICE Do not blow air to cleaning sections with an air gun. When the air is blown, dirt or dust inside the machine will disperse, which may adhere to the sensors, control…

4OM-1840

1-4-151604-001

4.4.1 Warm Gear (Two Locations) Oiling

Cycle : Every 3 Months (Required Time : 2 minutes)

Grease : MOLYNOC GREASE AP1

Worm Gear

Fig. 4A4-18

Procedure

Apply a small amount of new grease to the worm gears with a syringe.

Note

Use No. 19 (brown) nozzle.

No.19

Fig. 4A4-19

4.4 Feeder Base Driving Section

4OM-1840

1-4-161604-001

4.5 Feeder Cart Section

NOTICE

Do not blow air to cleaning sections with an air gun.

When the air is blown, dirt or dust inside the machine

will disperse, which may adhere to the sensors,

control boards and moving mechanisms causing

machine failures.

Groove on Feeder Base

Every Week Cleaning

Required Time:2minutes

Upper Surface of Feeder Base

Every Day Cleaning

Required Time:2minutes

Reel Box

Every Day Cleaning

Required Time:5minutes

Scrap Box

Every Day Cleaning

Required Time:1minute

Fig. 4A4-20

4.5 Feeder Cart Section

4OM-1840

1-4-171604-001

4.5.1 Feeder Base Upper Surface Groove Cleaning

Cycle : Every Week (Required Time : 2 minutes)

Groove on Feeder Base

Fig. 4A4-22

Procedure

Suck dirt and dust with a vacuum cleaner.

4.5 Feeder Cart Section