4M184002w_F8S.pdf - 第44页
Safety Precautions Safe-35 1OM-1840 1604-001 5. Alert Labels No. Alert Labels and Description (20) 10-0304- Do not touch your hand to the Reference Mark Block. When a strong force is given to the reference mark block, it…
Safety Precautions
Safe-34
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(16)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
(17)
Description
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
(18)
Do not touch your hand
onto the head block.
10-0330-
Description
Do not put your hand on the head block.
(19)
10-0314-
Push here when performing maintenance.
Description
When maintenance is to be performed, press here.
Safety Precautions
Safe-35
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(20)
10-0304-
Do not touch your hand to the Reference Mark Block.
When a strong force is given to the reference mark block,
it might be deformed.
Description
Do not put your hand on the reference mark block.
When a strong force is given to the reference mark block, it might be deformed.
(21)
10-0335-
Keep Linear Guide Grooves
Clear of Any Object!
An object in the groove may be trapped in the
moving part, causing the machine to be damaged.
Description
Keep the linear guide grooves clear of any object.
Otherwise, an object in the groove may be trapped in the moving part, causing the
machine to be damaged.
Safety Precautions
Safe-36
1OM-1840
1604-001
6. Precautionary Items for Correct Operations
6. Precautionary Items for Correct Operations
Requirements for Installation
Be sure to fulll the following requirements for safety purposes.
•
Overvoltage Category : Category
III
•
Pollution Degree : 2
•
Altitude : 1,000 m or less above the sea level
Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
Category III : Primary circuits of a device to which power is directly supplied from the
power distribution panel, and circuits from the distribution panel to outlets.
Note
The term was changed from "Installation Category" to "Overvoltage Category".
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 2 : This equipment is used under the environment where nonconductive pollu-
tion occurs, which may become conductive temporarily due to occasional
condensation.
Altitude means the height above sea level of the place where the machine is to be used.
Note
When the machine is used in a place that has an altitude of 1,000 meters or more,
consult with the Marketing Dept of Yamaha Motor Co., Ltd. or a sales agent.