4M184002w_F8S.pdf - 第194页

Error ID Error Name, Description, Cause, and Remedy 422303 positioning conveyor Error Conveyor did not stop ----- 422304 positioning conveyor Error Upward timeout on Backup(R) axis Motor is not completed. Please check mo…

Error ID Error Name, Description, Cause, and Remedy

421901 B-lane output conveyor

-----

422001 Simultaneous transfer timeout

Timeout during simultaneous transfer

Time-out of placement on Output Conveyor, Positioning Conveyor.

Please check P.C.B. position on conveyor.

422101 Input conveyor error

P.C.B. placement was not completed within predetermined time.

Time-out of P.C.B. placement from Input.

There is possibilities that P.C.B. is stopping on conveyor and it is not detected in

sensor. Please check Stagnated P.C.B..

422102 Input conveyor error

P.C.B. on input section was detected before placement is ready completely

The supplying entrance sensor detected P.C.B.(Carried out manual bypass, or

Placed between 2 pieces of Stagnated P.C.B. on conveyor)

422103 Input conveyor error

Placement is completed, but P.C.B. is not placed.

It stopped in the position where could not detect P.C.B. by P.C.B. slit, or P.C.B.

is fallen. Please check P.C.B. of supplying section, and reset it. Conrm the

adjustment of the width of Conveyor.(Set P.C.B. the position detected by sensor)

422104 Input conveyor error

Stop sensor of Input conveyor was detected while P.C.B. was ready for placing.

Remove Stagnated P.C.B., Please set P.C.B. correct positioning. (manual moving)

422201 positioning conveyor Error

Time Over in placement of product position(L)

Motor is not completed. Please check motor error or Pattern program set value

because there is a possibility that time-over value is inputted.

422202 positioning conveyor Error

Time Over in the downward on Backup(L) axis

-----

422203 positioning conveyor Error

Conveyor did not stop

-----

422204 positioning conveyor Error

Upward timeout on Backup(L) axis

Motor is not completed. Please check motor error or Pattern program set value

because there is a possibility that time-over value is inputted.

422301 positioning conveyor Error

Time Over in placement of product position(R)

Remove Stagnated P.C.B., Please set P.C.B. correct positioning. (manual moving)

422302 positioning conveyor Error

Time Over in the downward on Backup(R) axis

Motor is not completed. Please check motor error or Pattern program set value

because there is a possibility that time-over value is inputted.

3.3 Conveyor

4OM-1840

3-3-321604-001

Error ID Error Name, Description, Cause, and Remedy

422303 positioning conveyor Error

Conveyor did not stop

-----

422304 positioning conveyor Error

Upward timeout on Backup(R) axis

Motor is not completed. Please check motor error or Pattern program set value

because there is a possibility that time-over value is inputted.

422401 Output Conveyor Error

P.C.B. output was not completed within predetermined time.

P.C.B. is stagnating in P.C.B. Output for Output Machine. Please set stagnated

P.C.B.

422402 Output Conveyor Error

The output was completed, but P.C.B. is still placed on output conveyor .

P.C.B is stagnated although the movement in the position of transfer start is done.

Please conrm the stagnated P.C.B. and Conveyor transit section.

422403 Output Conveyor Error

No P.C.B. on output conveyor

P.C.B. was not detected when output started. There is a possibility whether not

detected by P.C.B. Slit or it is fallen. Please set correctly after checking P.C.B..

Conrm the adjustment of conveyor width.

422404 Output Conveyor Error

Stop sensor of output conveyor was detected while P.C.B. was ready for placing

Remove Stagnated P.C.B.

423001 Communication Error of transfer section

Error in AELINK communication

Error in P.C.B. board. Please exchange it.

423101 Error in NL-L1 axis

Zeroing Error on NL-L1 axis

No use the function. Please check the driver-axis setting when error is detected

because there is a possibility of error of driver-axis setting.

423102 Error in NL-L1 axis

Out-of-Control on NL-L1 axis was detected

No use the function. Please check the driver-axis setting when error is detected

because there is a possibility of error of driver-axis setting.

423103 Error in NL-L1 axis

Error in motor power voltage of NL-L1 axis

Motor power voltage dropped. Check out the Power supply line(48V Line)

423104 Error in NL-L1 axis

STP input on NL-L1 axis was detected

STP input is detected. The function to stop motor by Hard signal.

423105 Error in NL-L1 axis

Over-current on NL-L1 axis

Abnormal current in motor output line was detected. Conrm the motor wiring,

supplying power.

3.3 Conveyor

4OM-1840

3-3-331604-001

Error ID Error Name, Description, Cause, and Remedy

423106 Error in NL-L1 axis

Limit sensor(+) on NL-L1 axis was detected

No use the function. Please check the driver-axis setting when error is detected

because there is a possibility of error of driver-axis setting.

423107 Error in NL-L1 axis

Limit sensor(-) on NL-L1 axis was detected

No use the function. Please check the driver-axis setting when error is detected

because there is a possibility of error of driver-axis setting.

423108 Error in NL-L1 axis

Motor disconnection of NL-L1axis was detected

Disconnection to motor was detected.(Only stop mode)

Check the motor wiring.

423109 Error in NL-L1 axis

Error in control power voltage of NL-L1 axis

Control power for driver dropped. Check out the Power supply line.(24V Line)

42310a Error in NL-L1 axis

Reserved Code