4M184002w_F8S.pdf - 第206页

Error ID Error Name, Description, Cause, and Remedy 426108 Detection of positioning conveyor sensor Stop sensor of input position was not detected after movement completion Please check whether P .C.B. is detected correc…

Error ID Error Name, Description, Cause, and Remedy

425111 Detection of Input conveyor sensor

There is a possibility of interference between output PCB and input PCB.

Passing PCB occurred during simultaneous transfer. Please conrm that output is

running without problems.

425201 Input conveyor timeout

Placement was not completed within predetermined time.

There is a possibility that P.C.B. is caught, or dropped from Conveyor.

Please check the transition with Input Machine.

425202 Input conveyor timeout

Output was not completed within predetermined time.

There is a possibility that P.C.B. is caught, or dropped from Conveyor.

Please check the above conveyor.

425301 Input conveyor Error

Error in Input conveyor

-----

426101 Detection of positioning conveyor sensor

Decrease sensor of input position was detected before starting.

There is an indenite P.C.B. on Input position decelerating sensor.

Please remove P.C.B..

426102 Detection of positioning conveyor sensor

Decrease sensor of input position was not detected before starting.

There is no P.C.B. on conveyor.

1. Please put P.C.B. on Sensor

2. There is a possibility of P.C.B. fallen. Please check the width of Conveyor.

426103 Detection of positioning conveyor sensor

Stop sensor of input position was detected before starting.

There is an indenite P.C.B. on Input position stop sensor. Please remove P.C.B..

426104 Detection of positioning conveyor sensor

Stop sensor of input position was not detected before starting.

There is no P.C.B. on conveyor.

1. Please put P.C.B. on Sensor

2. There is a possibility of P.C.B. fallen. Please check the width of Conveyor.

426105 Detection of positioning conveyor sensor

Decrease sensor of input position was detected after movement completion

There is an indenite P.C.B. on Input position decelerating sensor. Please remove

P.C.B..

426106 Detection of positioning conveyor sensor

Decrease sensor of input position was not detected after movement completion

Please check whether P.C.B. is detected correctly. Check whether the sensor

doesn’t have Error.

426107 Detection of positioning conveyor sensor

Stop sensor of input position was detected after movement completion

There is an indenite P.C.B. on Input position stop sensor. Please remove P.C.B..

3.3 Conveyor

4OM-1840

3-3-441604-001

Error ID Error Name, Description, Cause, and Remedy

426108 Detection of positioning conveyor sensor

Stop sensor of input position was not detected after movement completion

Please check whether P.C.B. is detected correctly. Check whether the sensor

doesn’t have Error.

426109 Detection of positioning conveyor sensor

Decrease sensor of output position was detected before starting.

There is an indenite P.C.B. on Output position decelerating sensor. Please

remove P.C.B..

42610a Detection of positioning conveyor sensor

Decrease sensor of output position was not detected before starting.

There is no P.C.B. on conveyor.

1. Please put P.C.B. on Sensor

2. There is a possibility of P.C.B. fallen. Please check the width of Conveyor.

42610b Detection of positioning conveyor sensor

Stop sensor of output position was detected before starting.

There is an indenite P.C.B. on Output position stop sensor. Please remove P.C.B..

42610c Detection of positioning conveyor sensor

Stop sensor of output position was not detected before starting.

There is no P.C.B. on conveyor.

1. Please put P.C.B. on Sensor

2. There is a possibility of P.C.B. fallen. Please check the width of Conveyor.

42610d Detection of positioning conveyor sensor

Decrease sensor of output position was detected after movement completion

There is an indenite P.C.B. on Output position stop sensor. Please remove P.C.B..

42610e Detection of positioning conveyor sensor

Decrease sensor of output position was not detected after movement completion

-----

42610f Detection of positioning conveyor sensor

Stop sensor of output position was detected after movement completion

There is an indenite P.C.B. on Output position stop sensor. Please remove P.C.B..

426110 Detection of positioning conveyor sensor

Stop sensor of output position was not detected after movement completion

Please check whether P.C.B. is detected correctly. Check whether the sensor

doesn’t have Error.

426111 Detection of positioning conveyor sensor

P.C.B. on positioning conveyor was detected

Please remove P.C.B. from positioning conveyor.

426112 Detection of positioning conveyor sensor

NO P.C.B. on positioning conveyor

Conrm whether P.C.B. is not dropping. Conrm whether Sensor is not broken.

426113 Detection of positioning conveyor sensor

There is a possibility of interference between Output PCB and Input PCB.

Passing PCB occurred during simultaneous transfer. Please conrm that output is

running without problems.

3.3 Conveyor

4OM-1840

3-3-451604-001

Error ID Error Name, Description, Cause, and Remedy

426114 Detection of positioning conveyor sensor

PCB has now reached input position.

1. There is a possibility that PCB is inserted and is dropped from conveyor.

Please check the conveyor.

2. Please clear the PCB memory information in the edit screen if it is on the input

conveyor. Or, return the removed PCB."

426201 positioning conveyor timeout

Placement for input position was not completed within predetermined time.

1. There is a possibility that PCB is inserted between Input conveyor and Input

position or is dropped. Please conrm Input ~ positioning conveyor.

2. Please clear the PCB memory information in the edit screen if it is on the input

conveyor. Or, return the removed PCB.

3. Please check if cutout is on PCB. Please set cutout size in pattern program if

cutout is on PCB.

426202 positioning conveyor timeout

Output from input position was not completed within predetermined time.

1. There is a possibility that PCB is inserted between Input position and Output,

or is dropped. Please conrm positioning ~ output conveyor.

2. Please clear the PCB memory information in the edit screen if it is on the input

position. Or, return the removed PCB.

426203 positioning conveyor timeout

Placement for output position was not completed within predetermined time.

1. There is a possibility that PCB to take in the output position is inserted or

dropped. Please conrm input ~ positioning conveyor.

2. The state of PCB memory on the conveyor diers from the state of taking.

Please clear the PCB memory in the edit screen when if it is. Or, return the

removed PCB.

3. Please check if cutout is on PCB. Please set cutout size in pattern program if

cutout is on PCB.

426204 positioning conveyor timeout

Output from output position was not completed within predetermined time.

1. There is a possibility that PCB is inserted between Input position and Output,

or is dropped. Please conrm positioning ~ output conveyor.

2. Please clear the PCB memory information in the edit screen if it is on the

output position. Or, return the removed PCB.

426205 positioning conveyor timeout

Positioning was not completed within the predetermined time.

There is a possibility that PCB is inserted. Please check the PCB on the conveyor.

426301 positioning conveyor Error

Error in positioning conveyor

-----

426302 positioning conveyor Error

Error in positioning change.

Please check the PCB on the conveyor.

3.3 Conveyor

4OM-1840

3-3-461604-001