4M184002w_F8S.pdf - 第14页

Safety Precautions Safe-5 1OM-1840 1604-001 3. Common Precautionary Items Notes on Machine Operations  Please keep the instruction manual in a safe place within reach.  Follow the instructions in the instruction manual…

100%1 / 315
Safety Precautions
Safe-4
1OM-1840
1604-001
3. Common Precautionary Items
Always wear safety gear when operating or servicing equipment.
Helmet : Use during maintenance work
Safety glasses or goggles : Use around light harmful to eyes and when applying
lubricant, etc.
Respiratory gear : Use when handling organic solvents
Safety gloves : Use when applying lubricant, etc.

Even after the [EMERGENCY STOP] switch is pressed, note that electrical
power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to "OFF".

the customer side.
Emergency Switch Stop : Emergency Interception of Controlled Load Power Sources
  
In principle, the overall operation of the machine including the button operations
on the operation panel and the touch screen must be controlled by only one
person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the hard disk data be periodically backed up with the
network terminal (option).

authorized maintenance personnel.
Be sure to strictly keep the above-mentioned instructions. Otherwise, not only wrong
operations of the machine but also personal injury will result.
Safety Precautions
Safe-5
1OM-1840
1604-001
3. Common Precautionary Items
Notes on Machine Operations
Please keep the instruction manual in a safe place within reach.
Follow the instructions in the instruction manual for correct handling of the machine.
Be sure to fully understand the contents of the safety instructions in the instruction
manual and follow the instructions.
Please pay special attention to the precautionary items labeled on the machine or
described in the instruction manual and be sure to keep them. When the precautionary
items are ignored, it will result in personal injury or property damage (damage to the
machine).
Be sure to follow the operational instructions described in the instruction manual.

machine. Be sure not to use the machine with its safety devices detached. Doing
otherwise may cause personal injury.
Also, be sure not to change the setting of the operating system nor install any software
additionally.
Do not perform any operations other than those described in the instruction manual.
Whenever a problem arises, regarding the machine operations, performance, etc., please
contact the marketing department or sales agency of Yamaha Motor Co., Ltd. for the
solution.

This machine uses energetic driving systems and high voltage to run at high
speed. This power and voltage is high enough to cause death or serious injury.
To avoid this danger, respect the following guideline.
• The machine must be used with the covers being attached.
• Be sure to close the transparent covers (door type) before operating the
machine.
• Do not disengage the interlock mechanism of the transparent covers (door
type).

Whenever you feel danger or abnormality, immediately press the [EMERGENCY
STOP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a breakdown
will result.
Safety Precautions
Safe-6
1OM-1840
1604-001
3. Common Precautionary Items

When the operation is to be performed, make sure that the [PNL CHANGE]
button ashes (in green).
If the [PNL CHANGE] button does not ash, it can be dangerous because the
operation window can be changed from the opposite side.

When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectied completely, reset the machine to its normal
condition.


that the static machine is in the "Automatic" mode (standby mode).




When the machine stops due to a component pickup error, be sure to remove the
mispicked component from the feeder and start the automatic operation.

