4M184002w_F8S.pdf - 第43页
Safety Precautions Safe-34 1OM-1840 1604-001 5. Alert Labels No. Alert Labels and Description (16) Description If you put your hand or a heavy object on the backup table while working inside the machine, the backup tab…
Safety Precautions
Safe-33
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(13)
10-0282-
Pay attention to the moving
mechanisms!
Do not put your hand in the moving area.
Otherwise, your hand might be caught in
the moving area and injured.
Description
Be careful not to get caught.
Otherwise, a serious injury such as injury on your hand might be caused.
(14)
Do not put anything on it
This might damage the machine.
10-0326-
Description
Do not put any object on the machine. Doing so might damage the machine.
This might damage the machine.
(15)
Description
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
Safety Precautions
Safe-34
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(16)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
(17)
Description
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
(18)
Do not touch your hand
onto the head block.
10-0330-
Description
Do not put your hand on the head block.
(19)
10-0314-
Push here when performing maintenance.
Description
When maintenance is to be performed, press here.
Safety Precautions
Safe-35
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(20)
10-0304-
Do not touch your hand to the Reference Mark Block.
When a strong force is given to the reference mark block,
it might be deformed.
Description
Do not put your hand on the reference mark block.
When a strong force is given to the reference mark block, it might be deformed.
(21)
10-0335-
Keep Linear Guide Grooves
Clear of Any Object!
An object in the groove may be trapped in the
moving part, causing the machine to be damaged.
Description
Keep the linear guide grooves clear of any object.
Otherwise, an object in the groove may be trapped in the moving part, causing the
machine to be damaged.