00191025-01.pdf - 第515页

10 SI PLACE G SIPLACE 80S/F/G User’s Manual 10.7 Single Functions Edition 07/97 f rom Software Version SR.010.xx 10 - 48 ● New cart ridge ● In the men u "Glue ing unit" mo ve the cu rsor bar by mea ns of the cu…

100%1 / 736
SIPLACE 80S/F/G User’s Manual 10 SIPLACE G
Edition 07/97 from Software Version SR.010.xx 10.7 Single Functions
10 - 47
10.7.4.4 Glueing Unit 1,2,3
To select the menu "Glueing unit 1,2,3" proceed as follows:
●
In the menu "Single functions" use the cursor keys to select the menu item "Gantry".
●
Press the
Return key
. On the screen the menu "Gantry" appears.
●
In the menu "Gantry" use the cursor keys to select the appropriate glueing unit under the menu item
"Glueing unit".
Press the
Return key
. On the screen the menu "Glueing unit" appears for the glueing unit you have selected.
Fig. 10.7.5
SI 80G V 10.x
Cluster:
Display errors
Confirm errors
Machine options
Software options
Vision system
Error
State
Action
:
:
:
Single functions
Single functions
Gantry
Glueing unit 1
New cartridge
Continuous glueing
Display filling level
Display actual temperature
Set glueing point
Single functions
Glue spot check
10 SIPLACE G SIPLACE 80S/F/G User’s Manual
10.7 Single Functions Edition 07/97 from Software Version SR.010.xx
10 - 48
●
New cartridge
●
In the menu "Glueing unit" move the cursor bar by means of the
cursor keys
onto the menu item
"New cartridge".
●
Press the
Return key
.
You will be asked to confirm this.
Fig. 10.7.6
●
You may either confirm the change or not confirm it. If you do confirm it the glueing unit in question will
be initialized to a full cartridge.
●
Move the cursor bar onto the relevant function and press the
Return key
.
●
Continuous glueing
●
In the menu "Glueing unit" move the cursor bar by means of the
cursor keys
onto the menu item "Con-
tinuous glueing".
●
Press the
Return key
.
The menu "Continuous glueing" will then open.
SI 80G V 10.x
Cluster:
Display errors
Confirm errors
Machine options
Software options
Vision system
Error
State
Action
:
:
:
Single functions
Single functions
Gantry
Glueing unit 1
New cartridge
Confirm cartridge
Abort
SIPLACE 80S/F/G User’s Manual 10 SIPLACE G
Edition 07/97 from Software Version SR.010.xx 10.7 Single Functions
10 - 49
Fig. 10.7.7
●
If you press the space bar, continuous glueing will be activated. Press it again and continuous glueing
will be stopped.
●
Use the Esc key to quit the menu "Continuous glueing". If continuous glueing was activated it will now
be switched off.
SI 80G V 10.x
Cluster:
Display errors
Confirm errors
Machine options
Software options
Vision system
Error
State
Action
:
:
:
Single functions
Single functions
Gantry
Glueing unit 1
Continuous glueing
Press space bar ON/OFF
Esc.: abort
Blank: Continuous glueing