00191025-01.pdf - 第79页
SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.1 Introduction: Placement 5 - 3 5.1 Introduction: Placement 5.1.1 General The pla cement fun ctions of th e SIPLACE 80 F are iden…
5 Placement SIPLACE 80S/F/G User’s Manual
Edition 12/96 from Software Version SR.009.xx
5 - 2
SIPLACE 80S/F/G User’s Manual 5 Placement
Edition 12/96 from Software Version SR.009.xx 5.1 Introduction: Placement
5 - 3
5.1 Introduction: Placement
5.1.1 General
The placement functions of the SIPLACE 80 F are identical with those of the SIPLACE 80 S. Section 5,
"Placement", of the user's manual, edition 06/96, applies for this reason to both machine types. However the
screen will show the actual machine designation. When the Siplace 80 F has additional or different functions
the corresponding section will include supplementary information. Differences can also exist in the software
version notice and in the header of the screen menus. This does not however have any influence on the func-
tions.
If, at a later point of time, additional function changes or additions with regard to the SIPLACE 80 S are real-
ized, Section 5 "Placement" will be revised accordingly.
5.1.2 Flow Diagram: Placement
In the following Figure 5.1.1 the flow diagram for the function "Placement" is shown. This flow diagram applies
to both the SIPLACE 80 S and to the SIPLACE 80 F.
5 Placement SIPLACE 80S/F/G User’s Manual
5.1 Introduction: Placement Edition 12/96 from Software Version SR.009.xx
5 - 4
Fig. 5.1.1 Flowchart: Placement
Switch on - see Chapter 3
Loading cluster data
Setting up the machine according
to the placement program
Nozzle configuration
Component supply
(track assignment)
PCB handling
Changing nozzles
Fiducial error
Placement options
Placement
Track error
Machine error
Continue
placement
Track empty
Abort
placement
PCB to output conveyor
New cluster