00191025-01.pdf - 第707页

19 Error Messages S IPLACE 80S/F/G User’s Manual 19.1 Error Mess ages Edition 12/96 from Software Vers ion SR.009.xx 19 - 120 1086 Y axis error: undefined position type CAUSE ● Software error; shou ld not occur An inco r…

100%1 / 736
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 119
1079 Y axis error: undefined command
CAUSE
●
Software error; should not occur
REMEDY
●
1080 xk axis error: undefined command
CAUSE
●
Software error; should not occur
REMEDY
●
1081 yk axis error: undefined command
CAUSE
●
Software error; should not occur
REMEDY
●
1082 z axis error; GU1: undefined command
CAUSE
●
Software error; should not occur
REMEDY
●
1083 z axis error; GU2: undefined command
CAUSE
●
Software error; should not occur
REMEDY
●
1084 z axis error; GU3: undefined command
CAUSE
●
Software error; should not occur
REMEDY
●
1085 X axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 120
1086 Y axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1087 xk axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1088 yk axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1089 z axis error; GU1: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1090 z axis error; GU2: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1091 z axis error; GU3: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 121
1092 X axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1093 Y axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1094 xk axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1095 yk axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1096 z axis error; GU1: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1097 z axis error; GU2: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1098 z axis error; GU3: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again