00191025-01.pdf - 第714页

SIPLACE 80S/F/G User’s Manual 19 Error Message s Edition 12/96 from S oftware Version SR.009.xx 19.1 Error Messages 19 - 1 27 1134 X-axis error: Referenc e point not found CAUSE ● Referen ce point not fo und on sc ale; s…

19 Error Messages SIPLACE 80S/F/G User’s Manual

19.1 Error Messages Edition 12/96 from Software Version SR.009.xx

19 - 126

1127 X-axis error: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

1128 Y-axis error: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

1129 xk-axis error: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

1130 yk-axis error: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

1131 Z-axis error, GU1: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

1132 Z-axis error; GU2: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

1133 Z-axis error; GU3: incorrect acceleration

CAUSE

●

Invalid value in the machine data

REMEDY

●

Check the machine data

SIPLACE 80S/F/G User’s Manual 19 Error Messages

Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages

19 - 127

1134 X-axis error: Reference point not found

CAUSE

●

Reference point not found on scale; scale dirty or defective

REMEDY

●

Check scale; repeat reference run

1135 Y-axis error: Reference point not found

CAUSE

●

Reference point not found on scale; scale dirty or defective

REMEDY

●

Check scale; repeat reference run

1136 xk-axis error: Reference point not found

CAUSE

●

Reference pulse not found on increment disk; increment disk dirty or defective

REMEDY

●

Repeat reference run; check incremental pulses; if necessary, replace motor unit

1137 yk-axis error: Reference point not found

CAUSE

●

Reference pulse not found on increment disk; increment disk dirty or defective

REMEDY

●

Repeat reference run; check incremental pulses; if necessary, replace motor unit

1138 Z-axis error, GU1: Reference point not found

CAUSE

●

Reference pulse not found on increment disk; increment disk dirty or defective

REMEDY

●

Repeat reference run; check incremental pulses; if necessary, replace motor unit

1139 Z-axis error; GU2: Reference point not found

CAUSE

●

Reference pulse not found on increment disk; increment disk dirty or defective

REMEDY

●

Repeat reference run; check incremental pulses; if necessary, replace motor unit

1140 Z-axis error; GU3: Reference point not found

CAUSE

●

Reference pulse not found on increment disk; increment disk dirty or defective

REMEDY

●

Repeat reference run; check incremental pulses; if necessary, replace motor unit

19 Error Messages SIPLACE 80S/F/G User’s Manual

19.1 Error Messages Edition 12/96 from Software Version SR.009.xx

19 - 128

1141 X-axis error: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism

1142 Y-axis error: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism

1143 xk-axis error: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism

1144 yk-axis error: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism

1145 Z-axis error, GU1: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism

1146 Z-axis error; GU2: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism

1147 Z-axis error; GU3: I-square

CAUSE

●

R.m.s. current of the servo-amplifier exceeded; motor overloaded; mechanically stiff-running

REMEDY

●

Motor current should be checked; carry out maintenance on mechanism