00198439-03_SIPLACE_JTF-ML2_TX12_V1-V2_DE_EN_CHS.pdf - 第105页
2 Operational safety 2.1 Safety instructions User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 105 2 Operational safety 2.1 Safety instructions DANGER Nonobservance of t…
1 Introduction
1.2 Important Notes about this Manual
104 User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
2 Operational safety
2.1 Safety instructions
User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 105
2 Operational safety
2.1 Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
2.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.
2.1.2 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
2 Operational safety
2.1 Safety instructions
106 User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
2.1.3 Important notes on operational safety
The following points must be observed in order to maintain operational safety:
2.1.3.1 General
► Operational safety is only guaranteed during use of the user manual as prescribed.
► Always observe the applicable accident prevention regulations and the special safety regula-
tions in your country!
► Make sure that the warning labels are always clearly identifiable and always easily readable.
► Replace any damaged warning or notice labels. Replace any labels that are missing.
► The machine key for releasing the covers on the machine must be kept in a safe place where
it is only accessible to qualified personnel.
► If you need to work on the machine and you do not have adequately trained personnel at your
company, always call in a service engineer from ASM Assembly Systems GmbH & Co. KG!
ASM Assembly Systems GmbH & Co. KG will not accept liability for any damage or con-
sequential damage that is the result of incorrect work!
► If particularly hazardous situations are identified while the module is in use, the module owner
must immediately notify the manufacturer in writing so that appropriate action can be taken to
reduce the potential danger.
► Wear safety glasses when using alcohol to clean the conveyor belt.
WARNING
Safe operation of module
In spite of all the safety precautions taken by the manufacturer, failure to use the module as
prescribed can result in severe physical injury and/or considerable damage to equipment!
For the module to be safe, it must be used correctly by qualified personnel and all warnings
must be observed. Some work requires training that goes beyond the scope of this Manual.
See also
2 2.2.2 "Warning, Prohibition and Cautionary Labels" [}110]
2.1.3.2 Safety of Operators and Other Persons
► Module operators may only carry out work for which they have been adequately trained and
with which they are totally familiar!
► NEVER open one of the covers if you are not totally familiar with the use and functioning of
the module! Do not open the covers during operation unless you are told to do so in this
Manual or in the station software dialog!
► For your own safety, wear work clothes that conform to the guidelines of the professional
association, i.e. no wide sleeves etc.
► Reduce the risks by not wearing scarves, chains or ties at your work post.
► People with long hair must wear a protective head covering.
WARNING
Voltage
The module is electrically driven. When electrical devices are in use, certain parts carry
dangerous voltage levels!
► Before performing any work to parts which conduct electricity, switch the machine off
at the main switch and unplug the Lemosa socket for the adapter, to disconnect the
power between the module and the machine.
ð There is a risk of death, severe injury and/or considerable damage to equipment if
these instructions are not followed.