00198439-03_SIPLACE_JTF-ML2_TX12_V1-V2_DE_EN_CHS.pdf - 第99页
1 Introduction 1.1 Module description User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 99 1 Introduction This manual provides technical information and describes how to…
98 User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
Contents
1 Introduction
1.1 Module description
User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 99
1 Introduction
This manual provides technical information and describes how to operate the SIPLACE JTF-ML2
(JEDEC Tray Feeder) on SIPLACE® TX1/TX2 machines.
JEDEC waffle pack trays can be made available to the placement machine using the SIPLACE
JTF-ML2 option.
NOTICE
SIPLACE TX V1 and V2
This manual applies to the SIPLACE TX V1 and SIPLACE TX V2. Any differences will be
explicitly indicated.
1.1 Module description
In SIPLACE TX machines, a SIPLACE JTF-ML2 can be installed on the output side at location 1.
Depending on the magazine type, the SIPLACE JTF-ML2 stores up to 18 standard or 14 thick
JEDEC waffle pack tray magazines in two exchangeable cassettes and supplies them as required.
The placement machine can therefore be supplied with different component types at variable
changeover times.
1.1.1 Typeplate, Serial Number and ID Label
Fig.1: Typeplate
1) Typeplate
The feeder modules have a typeplate, which
specifies, among other things, the type, ma-
terial and serial number.
●
Type: SIPLACE JTF-ML2
●
Material No./Material-Nr.: 00588116
●
Serial-No./Serien-Nr.
2) ID Label Tower
3) ID Label Conveyor
Fig.2: Labels on SIPLACE JTF-ML2
The typeplate(1) is located on the side of
the SIPLACE JTF‑ML2.
The ID label tower(2) is located next to the
door at the tower.
The ID label conveyor(3) is located at the
top side of the conveyor.
1 Introduction
1.1 Module description
100 User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
1.1.2 EU Declaration of Conformity
The product/device described below conforms to the regulations and standards listed in the EU
Declaration of Conformity provided.
Model JEDEC tray feeder
Type SIPLACE JTF-ML2
Item no.: 00588116- xx
Manufacturer:
ASM Assembly Systems Singapore Pte Ltd
535 Yishun Industrial Park A
ASM Tech-Park Building 2
Singapore 768775
1.1.3 Correct Usage
The product may only be used for the application cases described in the catalogues and technical
specifications i.e. for placement of SMD components and only in connection with the third party
devices and components recommended or approved by ASM Assembly Systems GmbH & Co. KG.
Any other use is deemed to be incorrect and not as prescribed.
If the product is not used as prescribed, ASM Assembly Systems GmbH & Co. KG will accept no
liability for any damage that may occur and will not guarantee that the components will work
properly and without problems.
Prescribed or correct usage includes the observance of all the instructions in the user manual.
The proper and safe operation of the product requires correct transportation, storage, installation
and assembly, plus careful, accurate utilization and servicing.
1.1.4 Incorrect Usage
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, non-prescribed usage is prohibited. If the product is not used as pre-
scribed, ASM Assembly Systems GmbH & Co. KG will not accept liability for any damage that may
occur and will not guarantee that the components will work properly and without problems.
Non-prescribed use of the module includes the following examples:
●
Operation of the module with safety equipment deactivated or removed.
●
Placement of components that do not meet the permitted specification.
●
Use of unauthorized accessories and additional modules.
●
Use of the module by unqualified personnel.
1.1.5 Noise Emission Information
Max. noise emissions 75 dB (A)
1.1.6 Environmentally-friendly disposal of materials and components
Our products are manufactured using only materials and parts that can be easily separated and
disposed of in an environmentally-friendly way.
NOTICE
Observe the applicable regulations
The company operating the system has sole responsibility for the proper, environmentally-
friendly disposal of machines, working materials, consumable materials and wear parts.
► Please observe your national statutory provisions for waste disposal and environ-
mental protection.