00198439-03_SIPLACE_JTF-ML2_TX12_V1-V2_DE_EN_CHS.pdf - 第155页
4 Setting up and commissioning 4.3 Configuration of JEDEC tray feeders in SIPLACE Pro User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 155 Fig.112: Tray Tree View – As…
4 Setting up and commissioning
4.3 Configuration of JEDEC tray feeders in SIPLACE Pro
154 User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
4.3 Configuration of JEDEC tray feeders in SIPLACE Pro
SIPLACE JTF-ML2 are available from SIPLACE Pro 14.1 upwards. Former SIPLACE Pro versions
do not support the SIPLACE JTF-ML2.
4.3.1 SIPLACE JTF‑ML2 in SIPLACE Pro – Feeder Tree View
Fig.110: Feeder Tree View
Two SIPLACE JTF-ML feeder types can be
selected in the Feeder Tree View:
1. JTF-ML2 (7/7) for high components
– for 14 JEDEC waffle pack trays
height=12.19mm in two cassettes
– max. 14 different components (one
component type per waffle pack
tray)
2. JTF-ML2 (9/9) for standard compon-
ents
– for 18 JEDEC waffle pack trays
height=7.62mm in two cassettes
– max. 18 different components (one
component type per waffle pack
tray)
4.3.2 JEDEC Tray Description – Tray Tree View
Fig.111: Tray Tree View
► Define one JEDEC tray with dimensions that comply with the JEDEC tray standard.
► For the dimensions, refer to the data sheet of the manufacturer.
NOTICE
JEDEC tray standard
In order to fit in a JEDEC tray feeder, the dimensions must comply with the JEDEC tray
standard. In the example, a JEDEC tray with the name JEDEC Test was defined.
4 Setting up and commissioning
4.3 Configuration of JEDEC tray feeders in SIPLACE Pro
User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 155
Fig.112: Tray Tree View – Assign Feeder
► After defining a JEDEC tray you must assign it to a feeder. Select the relevant SIPLACE JTF
feeder type.
► Select the Feeder tab (1).
► Select Add to add a feeder or Remove to remove a feeder (2).
► Select the relevant SIPLACE JTF feeder(s) (multiple selection is possible) and confirm with
OK. Assigned SIPLACE JTF feeders (3) are displayed in the Select window.
4.3.3 Configuration of the station – Station Tree View
Not every station can be configured for the use of a JEDEC tray feeder.
The following stations with station software 710.1 or higher support the SIPLACE JTF-ML2:
●
SIPLACE TX1
●
SIPLACE TX2
The following stations with station software 711.1 or higher support the SIPLACE JTF-ML2:
●
SIPLACE TX1 V2
●
SIPLACE TX2 V2
4 Setting up and commissioning
4.3 Configuration of JEDEC tray feeders in SIPLACE Pro
156 User Manual / Bedienungsanleitung / 用户手册 SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
4.3.4 Assignment of JEDEC Tray to the Component Shape – Component Shape
Tree View
To be able to place a component with the JEDEC tray feeder later on, you must assign a JEDEC
tray to the component shape.
Fig.113: Component Shape Tree View
► (1) Select the component shape.
► (2) Select the Feeders tab.
► (3) Click the button Add… to select a JEDEC tray.
► Select an appropriate JEDEC tray from the list. The selected JEDEC tray is displayed under
Assignment.