00197725-12_GS_SE3.11_EN.pdf - 第53页
Getting Started SIPLACE Explorer 3 SIPLACE Explorer Runtime Envi ronment from 3.11 (R20-2) Edition 11/2020 EN 5 3 3 Fig. 3 - 32 S tep 4: Set production line schedule Select the req uired line with Select L ine . Make…
3 SIPLACE Explorer Runtime Environment Getting Started SIPLACE Explorer
Edition 11/2020 EN from 3.11 (R20-2)
52
3
Fig. 3 - 31 Step 1: edit line list
Select the required step from the left window and click on it. In this case, it is step 4.
Getting Started SIPLACE Explorer 3 SIPLACE Explorer Runtime Environment
from 3.11 (R20-2) Edition 11/2020 EN
53
3
Fig. 3 - 32 Step 4: Set production line schedule
Select the required line with Select Line.
Make your changes.
If you want your changes to be shown in the SMA, you will need to regenerate the SMA after
all changes have been made. Simply click on the Build button in the respective line
configuration step.
Start the SE Manager. Follow the instructions at “Using the SE Manager” on page 21.
Use the SE Manager to check the production line configuration. Follow the instructions at
“Manually Checking the SIPLACE Explorer Configuration for Problems” on page 26.
Start line monitoring for the modified production line, via the SE Manager:
– “Using the SE Manager” on page 21
– “Starting Production Line Monitoring in SIPLACE Explorer” on page 25
3 SIPLACE Explorer Runtime Environment Getting Started SIPLACE Explorer
Edition 11/2020 EN from 3.11 (R20-2)
54
3.7 Database Settings
This section will describe the following actions: 3
– “Database Connection Wizard” on page 54
– “Converting the Database” on page 58
– “Compressing the Database” on page 60
3.7.1 Database Connection Wizard
The Database Connection Wizard will be started if the system is unable to establish a connection
to the database. This could occur in the following cases: 3
– Runtime Environment:
Step 5 - Configure System Database page 38
– Development Environment:
Step 7 - Configure System Database page 38
– Factory Configuration Utility
Loading the DB settings on Factory Configuration Utility start, page 78
Setup and configuration of the system database consists of a simple three-step procedure.
Click on Next to continue.
3
Fig. 3 - 33 Welcome screen - database connection wizard