00197725-12_GS_SE3.11_EN.pdf - 第9页
Getting Started SIPLACE Explorer 1 General from 3.11 (R20-2) Edition 11/2020 EN 9 NOTE We would like to draw your attention to the fact that the conte nt s of these software instructions are not par t of a previous or ex…
1 General Getting Started SIPLACE Explorer
Edition 11/2020 EN from 3.11 (R20-2)
8
1.1.2 Where can you get Information?
If you have questions regarding these software instructions or would like more detailed information
about a particular topic, please contact the appropriate representative or us directly at: 1
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
D-81359 Munich, Germany 1
1.2 Target Group
The SIPLACE Explorer was developed for trained staff and service personnel. It is assumed that
users are thoroughly familiar with the machine. 1
1.2.1 User Classification
The operating software is structured in such a way that certain features or menus can only be
carried out/called up by specially trained staff. The following different user types exist: 1
– Line engineers
– Service engineers.
The access to each class can be password-protected.
1
The line engineer
The line engineer has completed a special training course and is authorized to carry out tasks
such as the creation of setup configurations and determination of vision parameters etc.
1
The service engineer
Persons of this class have been trained to carry out service work, to set up machines and to
change the setup of machines. 1
WARNING
Only people with the appropriate training for the specific software part may carry out tasks on the
machine. All tasks must be carried out by trained and qualified members of staff. All warning,
caution and danger notes must be observed! 1
Getting Started SIPLACE Explorer 1 General
from 3.11 (R20-2) Edition 11/2020 EN
9
NOTE
We would like to draw your attention to the fact that the contents of these software instructions are
not part of a previous or existing agreement, commitment or legal contract, neither is this intended
to modify one of the above. All obligations of ASM Assembly Systems GmbH & Co. KG may be
taken from the appropriate sales contract, which also contains a complete and valid warranty
agreement. These contractual statements are neither extended nor restricted by this software
guide. 1
1 General Getting Started SIPLACE Explorer
Edition 11/2020 EN from 3.11 (R20-2)
10