00198382-03_UM_SIPLACE-CA4-V2_EN.pdf - 第130页
3 Technical data and assemblies I nstruction manual SIPLACE CA4 V 2 3.7 PCB conveyor system From software version 713.0 Edition 12/20 19 130 3.7.4 Panel lane conveyor There ar e two different vac uum tooling options a va…
Instruction manual SIPLACE CA4 V2 3 Technical data and assemblies
From software version 713.0 Edition 12/2019 3.7 PCB conveyor system
129
3.7.3.5 Synchronous conveyor mode
In synchronous mode, two PCBs of the same size are transported into the placement position at
the same time. They are processed as a common panel. When using products with greatly differ-
ing placement content, common optimization increases the performance of the whole content on
both boards.
The time needed to convey the board is reduced as two boards are always conveyed at the same
time. It also ensures better utilization of the nozzle configuration.
PCBs on conveyor lanes 1 and 2 are moved synchronously onto the conveyor sections (i.e. the
conveyors are controlled synchronously, but independently of one another). The components to
be placed on conveyor lanes 1 and 2 must be organized into a panel via two subpanels.
If only one conveyor lane is occupied at the beginning of placement, this single use of the con-
veyor lane will be identified as "not to be placed".
If the dual lane conveyor is operated in synchronous mode, the ‘PCB whispering down the line’
option is deactivated. The "Global bad fiducial" option cannot be used.
3.7.3.6 I-Placement
In addition to synchronous and asynchronous conveyor mode, a new placement concept has
been developed for the SIPLACE CA4 V2: I-Placement. In this mode, the two heads work simul-
taneously and populate a PCB totally independently of one another. This further increases the out-
put.
3 Technical data and assemblies Instruction manual SIPLACE CA4 V2
3.7 PCB conveyor system From software version 713.0 Edition 12/2019
130
3.7.4 Panel lane conveyor
There are two different vacuum tooling options available for the Panel lane conveyor:
– Vacuum tooling L625 x W615 for wide workpiece carriers
– Vacuum tooling L330 x W315 for narrow workpiece carriers
Item no. 00519795-xx Panel lane conveyor vario
Item no. 03152121-xx Vacuum tooling L625 x W615
Item no. 03152135-xx Vacuum tooling L330 x W315
3
Fig. 3.7 - 5 Panel lane conveyor with vacuum tooling L625 x W615
(1) Vacuum tooling L625 x W615
(1)
Instruction manual SIPLACE CA4 V2 3 Technical data and assemblies
From software version 713.0 Edition 12/2019 3.7 PCB conveyor system
131
3
Fig. 3.7 - 6 Panel lane conveyor with vacuum tooling L330 x W315
(1) Vacuum tooling L330 x W315
(1)