00198382-03_UM_SIPLACE-CA4-V2_EN.pdf - 第17页
Instruction manual SIPLACE CA4 V2 1 Introduction From software version 713.0 Edition 12/2019 1.2 Placement machine description 17 1.2 Placement machine description 1.2.1 SIPLACE CA4 V2 1 Fig. 1.2 - 1 SIPLACE CA4 V2 place…
1 Introduction Instruction manual SIPLACE CA4 V2
1.1 Important notes on the instruction manual From software version 713.0 Edition 12/2019
16
GND Ground
HCU Head control unit
I-Placement Independent placement
JTF JEDEC tray feeder
LBO Long board option
PCB Printed circuit board
PLP Panel lane conveyor
P&P Pick&Place
NC Nozzle changer
SMD Surface mounted device
SLC Single lane conveyor
SC Station computer
SWS SIPLACE wafer system
VS Vision system
WLC Wafer lane conveyor
Instruction manual SIPLACE CA4 V2 1 Introduction
From software version 713.0 Edition 12/2019 1.2 Placement machine description
17
1.2 Placement machine description
1.2.1 SIPLACE CA4 V2
1
Fig. 1.2 - 1 SIPLACE CA4 V2 placement machine
(1) SIPLACE CA4 V2
(2) Component trolley at location 2
(T) Direction of PCB conveyor
The SIPLACE CA4 V2 impresses with high configuration flexibility, top placement performance
and maximum precision. The SIPLACE CA4 V2 can place bare dies directly from the wafer, in the
flip chip or die attach process. It also supports placement of the SMT spectrum used with the SI-
PLACE X4 S in conjunction with the relevant placement heads.
Two placement methods are used on the placement machines:
– The Collect&Place method for high-speed placement of standard components
– The Pick&Place method with the CPP M in Pick&Place mode, for fast placement of special
components in the fine-pitch and super fine-pitch range
(1)
(2)
1 Introduction Instruction manual SIPLACE CA4 V2
1.2 Placement machine description From software version 713.0 Edition 12/2019
18
The CA4 V2 has four gantries, two for each placement area (PA). All the gantry axes are driven
by linear motors. The gantry axes can be positioned quickly and accurately in the X and Y direc-
tions. Each gantry has one placement head. The gantry arms are lightweight constructions made
from a highly rigid carbon fiber composite material.
The SIPLACE CA4 V2 is based on the successful hardware and software platform from the SI-
PLACE X4 S.
The SIPLACE CA4 V2 facilitates a placement accuracy of up to 10 µm at 3
. The following com-
ponents from the SIPLACE CA4 V2 are used:
– SIPLACE SpeedStar C&P20 M2
– SIPLACE MultiStar CPP M
– High-resolution glass scales on the X and Y axis
– Highly rigid board conveyor
– Single lane conveyor
– Dual lane conveyor
– Panel lane conveyor with optional vacuum tooling
– Wafer lane conveyor with optional vacuum tooling
– Optional fiducial rail in X direction for cyclical calculation of the placement machine