00198382-03_UM_SIPLACE-CA4-V2_EN.pdf - 第42页
2 Operational safety Instruction manual SIPLACE CA4 V2 2.2 Warning labels From software version 713.0 Edition 12/2019 42 2.2.4 Mandatory signs on the plac ement machine for wafer lane conveyor If temperature -controlled …
Instruction manual SIPLACE CA4 V2 2 Operational safety
From software version 713.0 Edition 12/2019 2.2 Warning labels
41
2.2.3.9 Warning label W 006
2
W 006 in fig. 2.2 - 3, page 37, item no. 03009341-01 or
Item W 006 in fig. 2.2 - 7
, page 46, item no. 03009341-01 (quantity per placement machine: 4)
2
2
2
DANGER
Risk to life from powerful magnetic fields caused by the permanent magnets inside the
placement machine
When protective covers are opened inside the placement machine, the life of persons
with the following passive or active implants is put at risk:
– Pacemakers
– Defibrillators
– Insulin pumps etc.
At-risk people may not stand in the immediate vicinity of the placement machine.
WARNING
DANGER OF CRUSHING!
There is a danger of crushing for persons with passive metal implants (e.g. plates,
screws).
Never reach into the placement machine when the protective covers are open and
do not bend over the open placement machine.
Do not bring any metal objects into the danger area.
CAUTION
Data loss due to powerful magnetic fields!
There is a risk that the powerful magnetic fields could corrupt data on data media or credit
cards and check cards.
Keep data carriers and check cards away from the placement machine.
2 Operational safety Instruction manual SIPLACE CA4 V2
2.2 Warning labels From software version 713.0 Edition 12/2019
42
2.2.4 Mandatory signs on the placement machine for wafer lane conveyor
If temperature-controlled vacuum tooling DM 300 is fitted in the SIPLACE CA4 V2 in conjunction
with the wafer lane conveyor, two additional mandatory signs will be attached to the placement
machine.
Fig. 2.2 - 4 Mandatory signs on placement machines with temperature-controlled vacuum tooling DM 300
Item M004, item no. 03131413-01
Item M009, item no. 03131412-01
(T) Direction of PCB conveyor
M004
M004
M004
M009
M009
M009
M009
M004
Instruction manual SIPLACE CA4 V2 2 Operational safety
From software version 713.0 Edition 12/2019 2.2 Warning labels
43
2.2.4.1 Mandatory sign M004
2
Item M004 in fig. 2.2 - 4, page 42, item no. 03131413-01 (quantity per placement machine: 4)
2.2.4.2 Mandatory sign M009
2
Item M009 in fig. 2.2 - 4, page 42, item no. 03131412-01 (quantity per placement machine: 4)
2
2
2
Wear protective goggles
The temperature-controlled vacuum tooling DM 300 option can con-
tain hazardous fluids.
Always wear protective goggles with side protection, when
opening the protective cover/ side sliding door or when you are
in the vicinity of the temperature-controlled vacuum tooling.
2
2
2
Wear protective gloves
The temperature-controlled vacuum tooling option DM 300 could get
hot.
Always wear protective gloves when touching the temperature-
controlled DM 300 vacuum tooling option.