00198382-03_UM_SIPLACE-CA4-V2_EN.pdf - 第14页

1 Introduction Instruction manual SIPLACE CA4 V2 1.1 Important notes on the instruction manual From software vers io n 713.0 Edition 12/2019 14 1.1.3 Manufacturer's/supplier's liability We hereby confirm that t…

Instruction manual SIPLACE CA4 V2 1 Introduction

From software version 713.0 Edition 12/2019 1.1 Important notes on the instruction manual

1 Introduction

This instruction manual is a guide or reference work for operating and setting up the

SIPLACE

CA4 V2 placement machines.

– The SIPLACE CA4 V2 placement machine is available as a SIPLACE CA4 V2 variant with 4

gantries.

The header of each chapter contains the release and software version, to which this manual ap-

plies.

1.1 Important notes on the instruction manual

1.1.1 Contents and storage of the instruction manual

This instruction manual contains basic information that must be observed when setting up, oper-

ating and maintaining the machine. The service engineers, qualified staff, operators and users

plus system owner must therefore read it before commencing installation and commissioning. The

instructions must be kept permanently accessible where the placement machine is used.

In addition, the user must ensure that the employees have fully understood the contents of the

instruction manual.

1.1.2 Danger notes

WARNING

Read the instruction manual!

 Tasks may only be performed by qualified staff who have completed the relevant

training.

 Only perform tasks on the placement machine if you have precise knowledge of the

relevant section in the instruction manual.

 Observe all warnings, caution notes and hazard notes.

 Please also read chapter 2 of this instruction manual through carefully.

1 Introduction Instruction manual SIPLACE CA4 V2

1.1 Important notes on the instruction manual From software version 713.0 Edition 12/2019

1.1.3 Manufacturer's/supplier's liability

We hereby confirm that the contents of this instruction manual are of a descriptive and explanatory

nature only and do not contain any contractual conditions or guaranties. The liability and obliga-

tions assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the rele-

vant contract agreement concerning the supply of the placement machine described in this

manual. This applies in particular to all statements regarding performance or service life and the

agreed liability for faults or defects. The provisions of the contract regarding the liability for faults

or defect are neither extended nor restricted by any statements in this instruction manual.

1.1.4 Revision table

1.1.5 Further information about and contents of the documentation package

1.1.5.1 How to get information

If you have any further questions concerning this manual or if you would like additional information

on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:

ASM Assembly Systems GmbH&Co.KG

Rupert-Mayer-Str. 44

81379 Munich 1

Edition Changes

08/2018 – Initial edition

02/2019 – Updates and additions to the safety instructions in accordance with

the requirements of the risk analysis.

– Formal adjustments and minor corrections of errors.

12/2019 – New warning labels for deliveries to China and to "Rest of World"

– New mains power connection

– Formal adjustments and minor corrections of errors.

Instruction manual SIPLACE CA4 V2 1 Introduction

From software version 713.0 Edition 12/2019 1.1 Important notes on the instruction manual

1.1.5.2 SIPLACE on the World Wide Web (WWW)

We also have our own site on the Internet. Why not log onto our SIPLACE home page at http://

www.asm-smt.com.

All the menus and other information are available in two languages: You can choose between the

German and English versions.

The various headings contain information on

– Our products

– Services

– Contacts, etc.

Registered customers can also access the SIPLACE User Group. There you can call up special

information on our placement machines, such as

– Technical documentation

– Technical information

– Spare parts catalogs etc.

Registering for access to the User Group is easy:

 Click on ’Register now’.

 Complete the registration form and just send it off.

You will then quickly receive access authorization with USER ID and a password.

1.1.6 Abbreviations

A-Placement Alternating placement

PA Placement area

CO Component

C&P20 M2 High-precision Collect&Place head with 20 segments, SIPLACE SpeedStar

CPP M High-precision Collect&Pick&Place head, SIPLACE MultiStar

DLC Dual lane conveyor

EDIF Energy and data interface

ESD Electrostatically-sensitive group of components

EMC Electromagnetic compatibility

FC Flip chip

WT Waffle pack tray

WTC Waffle pack tray carrier

GCU Gantry control unit